Help Guide

77
Index
Appendix
Errors and Warnings
Troubleshooting
Settings
Playback
Shooting
Setup and Basics
Learning About the Camera
Accessories
Wireless Features
Wireless Features/Accessories
Setting Copyright Information to Record in Images
● Information you enter on the copyright information screen is recorded
in the images you capture.
● To check the information entered, choose [
5] tab → [Copyright
information] → [Display copyright info.], and then press the button.
● You can also use EOS Utility to enter, change, or delete copyright
information on the camera. Some characters entered with the software
may not be displayed on the camera but will be correctly recorded in
images.
● You can check copyright information recorded in images by using the
software, once you save the images to a computer.
● Download the EOS Utility instruction manual from the Canon website
as needed. For downloading instructions, see “Installing the Software”
(
=
42).
Deleting All Copyright Information
● You can delete both the author’s name and copyright details at the
same time, but copyright information already recorded in images is not
deleted.
Restoring Default Camera Settings
Restoring Camera Defaults
● Basic settings such as [Language ] and [Date/Time/Zone] are not
restored to defaults.
Cleaning the Image Sensor
Activating Sensor Cleaning
● The sensor cleaning also works while no lens is attached. If no lens is
attached, do not insert your nger or a blower tip past the lens mount,
which may damage the shutter curtains.
● For best results, clean with the camera placed upright on a desk or
other surface.
● Repeated cleaning will not produce notably better results. Note that
[Clean now
] may not be available immediately after cleaning.
● Contact a Customer Support Help Desk regarding dust or other
material that cannot be removed by sensor cleaning.
Cleaning the Sensor Manually
● The image sensor is extremely delicate. Clean the sensor with care.
● Use a blower without a brush attached. A brush may scratch the
sensor.
● Do not insert the blower tip inside the camera beyond the lens mount.
It can damage the shutter curtains.
● Never use canned air or gas to clean the sensor. The force of the air
may damage the sensor, and any gas that adheres and freezes on the
sensor may also damage it.
● If a smudge that cannot be removed with a blower remains, having the
sensor cleaned by a Customer Support Help Desk is recommended.