EOS Utility 2.3 Instruction Manual
Table Of Contents
- EOS Utility Instruction Manual
- Introduction
- Downloading Images to your Computer
- Setting the Camera from Your Computer
- Remote Shooting by Controlling the Camera from Your Computer
- Preferences
- Reference
- Troubleshooting
- Monitor Folder Function (Function for Use with the WFT-E2/E2A or E3/E3A)
- Function for Use with the Accessories
- Folder Structure and File Names in the Memory Card
- Uninstalling the Software
- List of Main Window Functions
- List of Viewer Window Functions
- List of My Menu Settings Window Functions
- List of Capture Window Functions
- List of Remote Live View window Functions
- List of Zoom View Window Functions
- List of Test Shooting Window Functions
- Index
25
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Remote Live View Shooting
You can control your camera remotely from EU, and while viewing on
your computer, you can focus the subject and check the results of your
camera settings before shooting.
Also, the shot image is saved directly on your computer and you can
recheck it using linked Digital Photo Professional (hereinafter DPP).
This function is effective for shooting large numbers with fixed-framing
such as for studio shooting.
1
Connect your camera and computer, and then turn
the camera’s power switch to < ON >.
¿ EU starts up.
O Looking into the viewfinder of the camera, compose your picture
and adjust the focus.
2
Click [Camera settings/Remote shooting].
¿ The capture window appears.
3
Set the camera.
O You can also use the functions of the [Shooting menu] (p.13).
O The settings that cannot be set in the capture window (drive
mode, AF mode, etc.) can be set by operating the camera.
Double-click the setting
item and select the setting