ImageBrowser 6.1 Instruction Manual

51
1
2
3
4
Introduction
Table of
Contents
Basic
Operation
Advanced
Operation
High-Level
Functions
Reference
Preferences
Contents
Lookup
Index
6
Check the save range and then click [Save].
 The [Save As] dialog box appears.
7
Specify the save destination and then click the
[Save] button.
 The merged images are saved.
8
Select the [PhotoStitch] menu X [Quit PhotoStitch].
 PhotoStitch quits.
Save range
Drag [ ] to change the range
See also the Help that are displayed when you click [ ] on the
right of the window for information on operating PhotoStitch and
PhotoStitch functions.
Adjusting RAW Images
You can make the same adjustments (reset processing conditions) to
RAW images as the functions that are available on the camera, such as
brightness and white balance adjustment. You can also convert edited
RAW images to JPEG or TIFF images and save them.
Because only the image processing conditions are changed when a
RAW image is adjusted, the original image data remains totally
unaffected. For this reason, image deterioration that usually
accompanies editing does not occur and you can readjust, redo or undo
changes knowing that you can always revert to the original shot
condition of the image.
1
Select a RAW image.
2
Select the [File] menu X [Processing RAW Images].
 RAW Image Task starts up and the main window appears.
3
Adjust the image.
 The image is adjusted.
 For the adjustment items in the RAW Image Task main window,
refer to p.70.
 Adjustment items displayed in [Image Quality Adjustment] vary
depending on the camera model used for shooting the RAW
image.
RAW Image Task main window