INSTRUCTION MANUAL E E INSTRUCTION MANUAL
Thank you for purchasing a Canon product. The EOS DIGITAL REBEL XS/EOS 1000D is a digital single-lens reflex camera with a 10.10-megapixel image sensor. The camera provides many features such as high-speed, 7-point autofocus to quickly focus moving subjects, Picture Styles to expand your photographic expression, diverse shooting modes from Full Auto to Creative modes, and Live View shooting.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Battery Pack LP-E5 (with protective cover) Battery Charger LC-E5/LC-E5E* Wide Strap EW-100DB III Interface Cable IFC-200U Video Cable VC-100 EOS DIGITAL Solution Disk (Software) Software Instruction Manual Camera (with eyecup and body cap) (1) Instruction Manual (this booklet) (2) Pocket Guide Quick start guide to shooting.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicate the cross keys. <0> : Indicates the setting button. 0, 9, 8 : Indicates that the respective function remains active for 4 sec., 6 sec., or 16 sec. respectively after you let go of the button. * In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.
Chapters For first-time users, chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction 2 Camera basics. 1 2 3 4 5 6 7 8 9 10 Getting Started Basic Shooting and Image Playback Fully automatic shooting for different subjects. Advanced Shooting Techniques Basic shooting features for specific types of subjects. More Advanced Techniques Advanced shooting techniques. Live View Shooting Shoot while viewing the LCD monitor.
Contents Introduction Item Check List.................................................................................................. 3 Conventions Used in this Manual ...................................................................... 4 Chapters ............................................................................................................ 5 Contents at a Glance....................................................................................... 10 Handling Precautions .................
Contents 3 Advanced Shooting Techniques 55 Program AE......................................................................................................56 Changing the ISO Speed .................................................................................57 Using the Built-in Flash ....................................................................................58 Changing the AF Mode ....................................................................................60 Selecting the AF Point.
Contents 6 Handy Features 107 Handy Features ............................................................................................. 108 Silencing the Beeper .................................................................................. 108 Card Reminder ........................................................................................... 108 Setting the Image Review Time ................................................................. 108 Setting the Auto Power-off Time................
Contents 8 Printing Images and Transferring Images to a Computer 133 Preparing to Print ...........................................................................................134 Printing ...........................................................................................................136 Digital Print Order Format (DPOF).................................................................143 Direct Printing with DPOF .............................................................................
Contents at a Glance Shooting Shoot automatically Î p.43 - 52 (Basic Zone modes) Shoot continuously Î p.47, 50, 63 (i Continuous shooting) Take a picture of myself in a group Î p.53 (j Self-timer) Freeze the action Take a blurred action shot Î p.70 (s Shutter-priority AE) Blur the background Keep the background in sharp focus Î p.72 (f Aperture-priority AE) Adjust the image brightness (exposure) Î p.78 (Exposure compensation) Shoot under low light Î p.
Focusing Change the point of focus Î p.61 (S AF point selection) Shoot a moving subject Î p.50, 60 (AI Servo AF) Playback View the images with the camera Î p.54 (x Playback) Search for pictures quickly Î p.124 (H Index display) Prevent important images from accidental deletion Î p.129 (K Image protect) Delete unnecessary images Î p.130 (L Delete) View the images on a TV set Î p.128 (Video OUT) Set the LCD brightness Î p.109 (LCD brightness) Printing Print pictures easily Î p.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Quick Start Guide Insert the battery. (p.26) 1 2 3 4 5 14 To recharge the battery, see page 24. For EF-S lens For EF lens Attach the lens. (p.33) When attaching an EF-S lens, align it with the white index on the camera. For other lenses, align it with the red index. Set the lens focus mode switch to . (p.33) Open the slot cover and insert a card. (p.31) With the card’s label facing you, insert it into the slot. Set the power switch to <1>. (p.
Quick Start Guide 6 Set the Mode Dial to <1> (Full Auto). (p.44) 7 Focus the subject. (p.37) 8 Take the picture. (p.37) Press the shutter button completely to take the picture. 9 Review the picture. (p.108) All the necessary camera settings will be set automatically. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject. The captured image will be displayed for about 2 sec. on the LCD monitor.
Nomenclature The names in bold indicate the parts explained up until the “Basic Shooting and Image Playback” section (up to p.54). Mode Dial (p.20) Built-in flash/AF-assist beam (p.58/116) Power switch (p.27) EF Lens mount index (p.33) EF-S Lens mount index (p.33) ISO speed set button (p.57) Flash-sync contacts <6> Main Dial (p.4) Hot shoe (p.166) Focal plane mark (p.49) Shutter button (p.37) Strap mount (p.22) Red-eye reduction/ Self-timer lamp (p.59/53) Flash button (p.
Nomenclature Dioptric adjustment knob (p.36) Aperture/Exposure compensation button (p.75/78) Eyecup (p.165) AE lock/ FE lock button/ Index/Reduce button (p.88/89/124/126,141) Viewfinder eyepiece Shooting settings display/ Trimming orientation button (p.42,113/141) AF point selection/ Magnify button (p.61/126,141) Menu button (p.38) Print/Share button/ White balance selection button (p.139,148/90) Card slot cover (p.31) DC cord hole (p.163) LCD monitor (p.
Nomenclature Shooting Settings Display Shutter speed Main Dial pointer (p.69) Exposure level indicator Aperture Exposure compensation amount (p.78) AEB range (p.80) ISO speed (p.57) White balance (p.90) Flash exposure compensation (p.79) y Built-in flash External Speedlite Q Auto W Daylight E Shade R Cloudy Y Tungsten light U White fluorescent light I Flash O Custom Shooting mode Drive mode (p.53,63) u Single shooting i Continuous shooting 10-sec. self-timer l 2-sec.
Nomenclature Viewfinder Information AF point display indicator < > AF points Focusing screen ISO speed Focus confirmation light AE lock/ AEB in-progress Max.
Nomenclature Mode Dial The Mode Dial has the Basic Zone modes and Creative Zone modes. Creative Zone These modes give you more control over the result. d : Program AE (p.56) s : Shutter-priority AE (p.70) f : Aperture-priority AE (p.72) a : Manual exposure (p.75) 8 : Automatic depth-of-field AE (p.76) Full Auto Basic Zone All you do is press the shutter button. Fully automatic shooting for specific kinds of subjects. 1: Full Auto (p.44) Image Zone 2 : Portrait (p.47) 3: Landscape (p.
Nomenclature Battery Charger LC-E5 Power plug Charge lamp Battery pack slot This power unit is intended to be correctly orientated in a vertical or floor mount position. IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet.
Nomenclature Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap. (p.
1 Getting Started This chapter explains preliminary steps and basic camera operations.
Recharging the Battery 1 Remove the protective cover. the battery. 2 Attach As shown in the illustration, attach the battery securely. To detach the battery, follow the above procedure in reverse. LC-E5 the battery. 3 Recharge For LC-E5 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet. For LC-E5E LC-E5E Connect the power cord to the charger and insert the plug into the power outlet.
Recharging the Battery Tips for Using the Battery and Charger Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power. After recharging the battery, detach it and unplug the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery Installing the Battery Load a fully charged Battery Pack LP-E5 into the camera. 1 Open the battery compartment cover. Slide the lever as shown by the arrow and open the cover. the battery. 2 Insert Insert the end with the battery contacts. Insert the battery until it locks in place. the cover. 3 Close Press the cover until it snaps shut. Removing the Battery Open the cover and remove the battery.
Turning on the Power When you turn on the power switch and the date/time setting screen appears, see page 29 to set the date/time. <1> : The camera turns on. <2> : The camera is turned off and does not operate. Set to this position when not using the camera. About the Automatic Self-Cleaning Sensor Whenever you set the power switch to <1> or <2>, the sensor cleaning will be executed automatically. During the sensor cleaning, the LCD monitor will display .
Turning on the Power Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of four levels: z : Battery level OK. x : Battery level is slightly down, but adequate power remains. c : Battery will be exhausted soon. n : Battery must be recharged. Battery Life Temperature [Approx.
3 Setting the Date and Time When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this Date/Time setting. Be sure to set the date/time. 1 Display the menu. Press the button to display the menu. the [6] tab, select [Date/ 2 Under Time]. Press the key to select the [6] tab.
3 Selecting the Interface Language 1 Display the menu. Press the button to display the menu. the [6] tab, select 2 Under [Language]. Press the key to select the [6] tab. Press the key to select [Language] (the third item from the top), then press <0>. the desired language. 3 Select Press the key to select the desired language, then press <0>. X The menu language will change. Press the button to return to the shooting settings display.
Installing and Removing the Card The captured image is recorded onto the card (sold separately). Make sure the card’s write protect switch is set upward to enable writing/erasing. Installing the Card 1 Card’s write protect switch Open the cover. Slide the cover as shown by the arrow to open it. the Card. 2 Insert As shown by the illustration, face the card’s label side toward you and insert it until it clicks in place. the cover.
Installing and Removing the Card Removing the Card 1 Access lamp Open the cover. Set the power switch to <2>. Check that “Recording...” is not displayed on the LCD monitor. Make sure the access lamp is off, then open the cover. the card. 2 Remove Gently push in the card, then let go. The card will stick out. Pull the card straight out, then close the cover.
Mounting and Detaching a Lens Mounting a Lens 1 EF-S lens mount index EF lens mount index Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow. the lens. 2 Attach Align the EF-S lens with the camera’s white EF-S lens mount index and turn the lens as shown by the arrow until it clicks in place. When attaching a lens other than an EF-S lens, align the lens with the red EF lens mount index. the lens, set the focus mode 3 On switch to (autofocus).
Mounting and Detaching a Lens About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Minimizing Dust When changing lenses, do it in a place with minimal dust.
About the Lens Image Stabilizer The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 IS lens as an example. * IS stands for Image Stabilizer. * The EF-S18-55mm f/3.5-5.6 II lens does not have an Image Stabilizer. 1 Set the IS switch to <1>. Set the camera’s power switch to <1>. the shutter button halfway. 2 Press X The Image Stabilizer will operate. the picture. 3 TakeWhen the picture looks steady in the viewfinder, press the shutter button completely to take the picture.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right so that the seven AF points in the viewfinder look sharp. If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting 1.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder. (0) Pressing completely This releases the shutter and takes the picture.
Menu Operations and Settings By setting various optional settings with the menus, you can set the imagerecording quality, date/time, etc. While looking at the LCD monitor, you use the button, cross keys, and <0> button on the camera back. button <0> button LCD monitor Cross keys Basic Zone Mode Menu Screen * The [2/7/9] tabs are not displayed in the Full Auto and Basic Zone modes. When a Basic Zone mode is set, there are menu items which are not displayed.
Menu Operations and Settings Menu Setting Procedure 1 Display the menu. Press the button to display the menu. a tab. 2 Select Press the key to select a menu tab. You can also turn the <6> dial to select a tab. a menu item. 3 Select Press the key to select the menu item, then press <0>. the setting. 4 Select Press the or key to select the setting. (Some settings require you to press either the or key to select it.) Some menu items will indicate the current setting in blue.
3 Formatting the Card If the card is new or was previously formatted by another camera or personal computer, format the card with the camera. Formatting the card will erase everything in the card. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a personal computer before formatting the card. 1 Select [Format]. Under the [5] tab, select [Format], then press <0>. the card. 2 Format Select [OK], then press <0>.
3 Formatting the Card About Low-level Formatting Do low-level formatting if the card’s recording or reading speed seems slow. Since low-level formatting will erase all recordable sectors in the card, the formatting will take slightly longer than normal formatting. You can stop the low-level formatting by selecting [Cancel]. Even in this case, normal formatting will have been completed and you can use the card as usual. When the card is formatted, only the file management information is changed.
Switching the LCD Monitor Screen The LCD monitor can display the shooting settings screen, menu screen, image, etc. Shooting Settings The shooting settings are displayed when the camera is turned on. The display turns off when you press the shutter button halfway (p.37). When you let go of the shutter button, the display turns on again. You can also turn off the display by pressing the button or <0>. Display it again by pressing the button again. Menus Appears when you press the button.
2 Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to playback images. With the Basic Zone modes, all you do is point and shoot and the camera sets everything automatically. Also, to prevent botched pictures due to mistaken operations, shooting settings cannot be changed in the Basic Zone modes. The settings (functions set automatically) which cannot be set by the user are grayed out.
1 Fully Automatic Shooting AF point 1 Set the Mode Dial to <1>. any AF point over the 2 Aim subject. All the AF points will operate, and focus will generally be achieved at the AF point covering the closest object. Aiming the center AF point over the subject will make focusing easier. the subject. 3 Focus Press the shutter button halfway, and the lens will move to focus. X The dot inside the AF point achieving focus flashes briefly in red.
1 Fully Automatic Shooting FAQ The focus confirmation light blinks and focus is not achieved. Aim the AF point over an area having good contrast between light and dark, then press the shutter button halfway. (p.162) If you are too close to the subject, move away and try again. Sometimes multiple AF points flash simultaneously. This indicates that focus has been achieved at all those AF points. As long as the AF point covering the desired subject flashes, you can take the picture.
1 Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <1> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called “focus lock”. Focus lock is also possible in other Basic Zone modes (except <5> Sports).
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes flesh tones and the hair look softer than with the <1> (Full Auto) mode. Shooting Tips The farther the distance between the subject and background, the better. The farther the distance between the subject and background, the more blurred the background will look. The subject will also stand out better in front of a plain, dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and sharp than with <1> (Full Auto). Shooting Tips With a zoom lens, use the wide-angle end. When using a zoom lens, use the wide-angle end. This will have objects near and far in focus, better than at the telephoto end. It also adds breadth to landscapes. Shooting night scenes.
4 Shooting Close-ups When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes the flower, etc., stand out better. Move to the subject as close as possible. Check the lens for its minimum focusing distance. Some lenses have indications such as <40.25m/0.8ft>.
5 Shooting Moving Subjects To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Shooting Tips Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to auto focus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus confirmation light will blink.
6 Shooting Portraits at Night To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Use a tripod to prevent camera shake. Keep the person within 5 meters/16.4 feet from the camera. Under low light, the built-in flash will fire automatically to obtain a good exposure of the person.
7 Disabling Flash In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for candlelight scenes when you want to obtain the candlelight effect. Shooting Tips If the numeric display in the viewfinder blinks, take care to prevent camera shake. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink. Hold the camera steady or use a tripod.
j Using the Self-timer 1 Press the button. the self-timer. 2 Select Press the key to select the desired self-timer, then press <0>. : 10-sec. self-timer l: 2-sec. self-timerN (p.94) q: 10-sec. self-timer plus continuous shots Press the key to set the number of multiple shots (2 to 10) to be taken with the self-timer. the picture. 3 TakeFocus the subject and press the shutter button completely.
x Image Playback The easiest way to playback images is explained below. For more details on image playback methods, see page 123. 1 Playback the image. When you press the button, the last captured image will be displayed. the image. 2 Select To view images starting with the last image, press the key. To view images starting with the first (oldest) image, press the key. Press the button to change the display format.
3 Advanced Shooting Techniques In the Basic Zone modes, to prevent spoiled shots, most functions are set automatically and cannot be changed. In the (Program AE) mode, you can set various functions and be more creative. In the (Program AE) mode, the camera sets the shutter speed and aperture automatically to obtain the standard exposure. The difference between the Basic Zone modes and is explained on page 170. * stands for Program. * AE stands for Auto Exposure.
d: Program AE To obtain a good exposure of the subject, the camera sets the exposure (shutter speed and aperture) automatically. This is called Program AE. 1 Set the Mode Dial to . the picture. 2 TakePress the shutter button halfway and the camera will focus. X The exposure setting (shutter speed and aperture) set automatically is displayed in the viewfinder. Press the shutter button completely. Shooting Tips Changing the ISO speed and using the built-in flash.
Z: Changing the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In the Basic Zone modes, the ISO speed is set automatically. 1 Press the button. (9) X [ISO speed] will appear. the ISO speed. 2 Select Turn the <6> dial or press the key to select the ISO speed. You can also look at the ISO speed in the viewfinder while turning the <6> dial.
D Using the Built-in Flash In indoors, low light, or backlit conditions, just pop-up the built-in flash and press the shutter button to take flash pictures. In the mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the button. In Creative Zone modes, you can press the button anytime to take flash pictures. While the flash is recycling, “DbuSY” is displayed in the viewfinder, and [BUSYD] is displayed on the LCD monitor.
D Using the Built-in Flash Shooting Tips If the subject is far away, increase the ISO speed. By increasing the ISO speed, you can extend the flash range. In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood and keep at least 1 meter/3.3 feet away from the subject. If the lens hood is attached or if you are too close to the subject, the bottom portion of the picture might turn out dark.
E: Changing the AF ModeN You can change the AF mode to suit different subjects such as group photos, animals, and sports. the button. 1 Press X [AF mode] will appear. the AF mode. 2 Select Press the key to select the AF mode, then press <0>. 3 Focus the subject. Aim the AF point over the subject and press the shutter button halfway. The camera will then autofocus in the selected AF mode. Selecting the Best AF Mode X (One-Shot AF) Suitable for still subjects.
S Selecting the AF PointN In the Basic Zone modes, all the AF points are active. Generally, the AF point covering the closest subject will be selected to focus. Therefore, the camera sometimes may not focus the subject you want. With the (Program AE), , , and modes, you can select one AF point to focus where you want. 1 Press the button. (9) X The selected AF point is indicated on the LCD monitor and in the viewfinder.
S Selecting the AF PointN Shooting Tips When shooting a portrait up close, use One-Shot AF and focus the eyes. If you focus the eyes first, you can then recompose and the face will remain sharp. If it is difficult to focus, select and use the center AF point. The center AF point focuses the best among the seven AF points. To make it easier to focus a moving subject, set the camera to automatic AF point selection and AI Servo AF. First use the center AF point to focus.
i Continuous ShootingN You can shoot up to about 3 shots per sec. This is effective for shooting your child running toward you and capturing the different facial expressions. 1 Press the button. . 2 Select Press the key to select , then press <0>. The continuous shooting speed will vary depending on the image-recording quality that has been set (p.64). JPEG : Max. approx. 3 shots/sec. 1 : Max. approx. 1.5 shots/sec. 1+73: Max. approx. 1.5 shots/sec. picture.
3 Setting the Image-recording Quality You can select the pixel count (approx. 10.1, 5.3, or 2.5 megapixels) and the image quality. 1 Select [Quality]. Under the [1] tab, select [Quality], then press <0>. X [Quality] will appear. the image-recording quality. 2 Select For your reference, the respective quality’s megapixel count (***M), image size in pixels (****x****), and the number of possible shots [***] will be displayed. Select the desired quality, then press <0>.
3 Setting the Image-recording Quality FAQ I want to select the quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A3 (42x29.7cm/16.5x11.7in.) you want to crop the image, selecting a 73 higher quality (more pixels) such as 73, 83 A4 (29.7x21cm/ 1 83, 1, or 1+73 is recommended. 11.7x8.3in.) 76 86 74 1+73 84 17.8x12.7cm/7.0x5.0in. 14.8x10cm/5.8x3.9in.
3 Setting the Image-recording Quality About 1 1 is the raw data before it is made into a 73 or other images. Although 1 images require software like Digital Photo Professional (provided) so they can be displayed on the computer, they also offer flexibility for image adjustments possible only with 1. 1 is effective when you want to precisely create your own art or shoot an important subject.
A Selecting a Picture StyleN By selecting a Picture Style, you can obtain the desired image effects matching your photographic expression or the subject. 1 Press the button. X [Picture Style] will appear. a Picture Style. 2 Select Press the key to select the Picture Style, then press <0>. the picture. 3 TakeFocus and press the shutter button completely. The picture will be taken with the selected Picture Style applied. Picture Style Effects P Standard The image looks vivid, sharp, and crisp.
A Selecting a Picture StyleN S Neutral This is for users who prefer to process images with their personal computer. For natural colors and subdued images. U Faithful This is for users who prefer to process images with their personal computer. When the subject is captured under a color temperature of 5200K, the color is adjusted colorimetrically to match the subject’s color. The image is dull and subdued. V Monochrome For black-and-white images.
4 More Advanced Techniques This chapter builds on the previous chapter and introduces more ways to shoot creatively. The first half of this chapter explains how to use the <8> modes on the Mode Dial. Except for <8>, all the shooting modes can be used in combination with the functions introduced in Chapter 3. The second half of this chapter, starting with “Changing the Metering Mode” explains the methods to adjust the exposure and the Picture Styles.
s: Action Shots You can either freeze the action or create motion blur with the (Shutter-priority AE) mode on the Mode Dial. * stands for Time value. Frozen action (Fast shutter speed) 1 Blurred action (Slow shutter speed) Set the Mode Dial to . the desired shutter speed. 2 SetSee “Shooting Tips” for advice on setting the shutter speed. Turning the <6> dial to the right sets a faster shutter speed, and turning it to the left sets a slower one. the picture.
s: Action Shots Shooting Tips To freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. To blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake. How to blur a flowing river or water fountain.
f: Changing the Depth of Field To obtain a blurry background or to make everything near and far look sharp, set the Mode Dial to (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * stands for Aperture value which is the size of the diaphragm hole inside the lens. Blurred background (With a large aperture opening) 1 Sharp foreground and background (With a small aperture opening) Set the Mode Dial to . desired aperture.
f: Changing the Depth of Field Shooting Tips When using a high aperture, note that camera shake can occur in low light scenes. A higher aperture will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod. The depth of field depends not only on the aperture, but also the lens and subject distance.
f: Changing the Depth of Field Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash exposure). The shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s brightness. In low light, the main subject is exposed with the automatic flash, and the background is exposed with a slow shutter speed set automatically.
a: Manual Exposure You can set both the shutter speed and aperture as desired. With flash, the flash exposure will be set automatically to match the aperture that was set. The flash sync speed can be set within 1/200 sec. to 1/30 sec. or to bulb. * stands for Manual. 1 Set the Mode Dial to . speed and aperture. 2 SetTothesetshutter the shutter speed, turn the <6> + <6> Standard exposure index Exposure level mark <6> dial. To set the aperture, hold down the button and turn the <6> dial.
8: Automatic Depth-of-Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically. * <8> stands for Auto-Depth of field. This mode sets the depth of field automatically. 1 Set the Mode Dial to <8>. the subject. 2 Focus Aim the AF points over the subjects and press the shutter button halfway.
q Changing the Metering ModeN The metering mode is the method of measuring the brightness of the subject. Normally, evaluative metering is recommended. 1 Press the button. X [Metering mode] will appear. the metering mode. 2 Select Press the key to select the metering mode, then press <0>. q Evaluative metering This is an all-around metering mode suited for portraits and even backlit subjects. The camera sets the exposure automatically to suit the scene.
Setting Exposure CompensationN Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker (decreased exposure). The exposure compensation setting will not be automatically canceled when you turn off the camera. After taking the picture, reset the exposure compensation to zero. O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired.
Setting Exposure CompensationN y Flash Exposure CompensationN Set flash exposure compensation if the flash exposure of the subject does not come out as desired. This feature also works with external EX-series Speedlites. 1 Select [Flash exp comp]. Under the [2] tab, select [Flash exp comp], then press <0>. exposure compensation amount. 2 SetTothemake the flash exposure brighter, press the key. (Increased exposure) Or to make it darker, press the key.
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker exposure (Decreased exposure) 1 AEB amount Brighter exposure (Increased exposure) Select [AEB]. Under the [2] tab, select [AEB], then press <0>. the AEB amount. 2 SetPress the key to set the AEB amount, then press <0>.
3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to set the AEB amount to < >. The AEB setting will be canceled automatically if the power switch is set to <2>, obtain flash-ready, etc. Shooting Tips Using AEB with continuous shooting. If continuous shooting (p.63) has been set and you press the shutter button completely, the three bracketed shots will be taken continuously in this sequence: Standard, decreased, and increased exposure. Using AEB with single shooting.
A Customizing the Picture StyleN You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 84. 1 Select [Picture Style]. Under the [2] tab, select [Picture Style], then press <0>. X The Picture Style selection screen will appear. a Picture Style. 2 Select Select a Picture Style, then press the button. X The Detail set. screen will appear. a parameter.
A Customizing the Picture StyleN Parameter Settings and Effects Sharpness Adjusts the sharpness of the image. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end. The closer it is to F, the sharper the image will look. Contrast Adjusts the image contrast and the vividness of colors. To decrease the contrast, set it toward the minus end. The closer it is to G, the blander the image will look.
A Customizing the Picture StyleN Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. Filter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N: None Normal black-and-white image with no filter effects. Ye: Yellow The blue sky will look more natural, and the white clouds will look crisper.
A Registering the Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are different. You can also adjust the parameters of a Picture Style which has been registered to the camera with the provided software. 1 Select [Picture Style].
A Registering the Picture StyleN a parameter. 5 Select Select a parameter such as [Sharpness], then press <0>. the parameter. 6 SetPress the key to adjust the parameter as desired, then press <0>. For details, see “Customizing the Picture Style” on pages 82-84. Press the button to register the new Picture Style. The Picture Style selection screen will then reappear. X The base Picture Style will be indicated on the right of [User Def. *].
3 Setting the Color SpaceN The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal images, sRGB is recommended. In the Basic Zone modes, sRGB is set automatically. 1 Select [Color space]. Under the [2] tab, select [Color space], then press <0>. the desired color space. 2 SetSelect [sRGB] or [Adobe RGB], then press <0>.
A AE LockN Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects. 1 Focus the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button.
A FE LockN FE lock locks the flash exposure setting over the desired area of the subject. This feature also works with external EX-series Speedlites. * FE stands for Flash Exposure. 1 Press the button to pop-up the built-in flash. Press the shutter button halfway and look in the viewfinder to check that the icon is lit. 2 Focus the subject. the button. (8) 3 Press Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the button.
B: Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with , you can select the white balance for each light source or set it manually by shooting a white object. In the Basic Zone modes, will be set automatically. the button. 1 Press X [White balance] will appear. the white balance.
B: Setting the White BalanceN [Custom WB]. 2 Select Under the [2] tab, select [Custom WB], then press <0>. X The SET screen will appear. the white balance data. 3 Import Select the image that was captured in step 1, then press <0>. X On the dialog screen which appears, select [OK] and the data will be imported. When the menu reappears, press the button to exit the menu. the custom white balance. 4 Select Press the button. Press the key to select , then press <0>.
3 White Balance CorrectionN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters. White Balance Correction 1 Select [WB SHIFT/BKT]. Under the [2] tab, select [WB SHIFT/BKT], then press <0>.
3 White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images having a different color tone can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
Preventing Camera ShakeN The camera’s mechanical shake caused by the reflex mirror action can affect images taken with a super telephoto lens or close-up (macro) lens. In such cases, mirror lockup is effective. Mirror lockup is enabled by selecting [7 Custom Functions (C.Fn)] and setting [Mirror lockup] (p.157) to [1: Enable]. Focus the subject and press the shutter button completely. The reflex mirror will lock up. Then press the shutter button completely again to take the picture.
5 Live View Shooting You can shoot while viewing a real-time image on the camera’s LCD monitor or on a personal computer screen. This is called “Live View shooting.” Convenient when the camera is mounted on a tripod for shooting still lifes, for example. If you handhold the camera like a compact digital camera and shoot while viewing the LCD monitor, camera shake can cause blurred images.
Preparing for Live View ShootingN Set the camera for Live View shooting. 1 Set the shooting mode. Set the shooting mode to a Creative Zone mode. Live View shooting does not work in Basic Zone modes. [Live View function 2 Select settings]. Under the [6] tab, select [Live View function settings], then press <0>. [Live View shoot.]. 3 Select Select [Live View shoot.], then press <0>. Select [Enable], then press <0>. the menu. 4 ExitPress the button to exit. Display the Live View image. 5 Press <0>.
Preparing for Live View ShootingN During Live View shooting, do not point the camera toward the sun. The sun’s heat can damage the camera’s internal components. Live View shooting will disable a few Custom Function settings. (p.153) Under low light or bright light conditions, the Live View image might not reflect the brightness of the captured image. If the light source within the image changes, the screen might flicker.
Focusing ManuallyN Although autofocus can be used (p.102, 104), magnifying the image and focusing manually is recommended for precise focusing. Magnifying the Image for Manual Focusing 1 Set the lens focus mode switch to . Turn the lens focusing ring to focus roughly. the focusing frame to the 2 Move position where you want to focus. Press the key to move the focusing frame. To move to the center focusing frame, press the button. the image. 3 Magnify Press the button.
ShootingN 1 Check the exposure. Press the shutter button halfway. X The shutter speed and aperture will be displayed. If you set exposure compensation, the image brightness will change accordingly. the picture. 2 TakePress the shutter button completely. X The picture will be taken and the captured image is displayed on the LCD monitor. X After the image review ends, the camera will return to Live View shooting automatically. shooting. 3 ExitWithLivetheView Live View image displayed, press <0>.
ShootingN Battery Life with Live View Shooting Temperature [Approx. number of shots] Shooting Conditions No Flash 50% Flash Use At 23°C / 73°F 200 190 At 0°C / 32°F 190 180 The figures above are based on a fully-charged LP-E5 battery and CIPA (Camera & Imaging Products Association) testing standards. Autofocusing will decrease the number of possible shots. When you use Live View shooting for a long period, the camera’s internal temperature may increase and it can degrade image quality.
ShootingN About the Information Display Each time you press the button, the information display will change.
Using AF to FocusN Under [7 Custom Functions (C.Fn)], when [AF during Live View shooting] (p.157) is set to [1: Quick mode] or [2: Live mode], you can focus with AF. Quick mode and Live mode use a different AF method. If you want precise focusing, magnify the image and focus manually. (p.98) C.Fn-7-1: Quick mode This is the same as using AF (p.60, 61) as usual with the dedicated AF sensor.
Using AF to FocusN the subject. 3 Focus Aim the selected AF point over the subject, and hold down the button. X The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. X When focus is achieved, the beeper will sound. to the Live View image 4 Return display and shoot. When you let go of the button, the Live View image will reappear. Check the focus and exposure, then press the shutter button to take the picture (p.99).
Using AF to FocusN C.Fn-7-2: Live mode The image sensor is used to focus. Although AF is possible with the Live View image displayed, the AF operation will take longer than with Quick mode. Also, achieving focus may be more difficult than with Quick mode. Set to Live mode and the lens focus mode switch to . 1 Display the Live View image. Press <0>. X The Live View image will appear on the LCD monitor. When Live mode is set, the AF point < > will be displayed. the subject.
Using AF to FocusN About the AF point with Live mode You can press the keys to move the AF point to where you want to focus (it cannot go to the edges of the picture). To move to the center AF point, press the button. To magnify the image at the AF point, press the button. If focusing is difficult with the magnified image, return to the full view and use AF.
Using AF to FocusN With Live mode, AF can fail to achieve focus in the following cases: Low-contrast subject such as a blue sky and solid-color surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, color, or pattern keeps changing. Night scenes or points of light. Under fluorescent lighting or when the image flickers. Extremely small subjects. Subjects strongly reflecting light.
6 Handy Features Silencing the Beeper (p.108) Card Reminder (p.108) Setting the Image Review Time (p.108) Setting the Auto Power-off Time (p.109) Setting the LCD Monitor Brightness (p.109) File Numbering Methods (p.110) Auto Image Rotation (p.112) Checking Camera Function Settings (p.113) Reverting the Camera to the Default Settings (p.114) Preventing the LCD Monitor from Turning off Automatically (p.115) Changing the Shooting Settings Screen Color (p.115) Flash Control (p.
Handy Features 3 Silencing the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [1] tab, select [Beep], then press <0>. Select [Off], then press <0>. 3 Card Reminder This prevents shooting if there is no card in the camera. Under the [1] tab, select [Shoot w/o card], then press <0>. Select [Off], then press <0>.
Handy Features 3 Setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can wake up the camera by pressing the shutter button halfway or any of the following buttons: <0> etc.
Handy Features 3 File Numbering Methods The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. The file number will appear on the personal computer in this format: IMG_0001.JPG. Under the [5] tab, select [File numbering], then press <0>. Follow the steps below to select a file numbering method, then press <0>.
Handy Features [Auto reset]: Resets the file numbering to 0001 whenever the card is replaced. Each time you replace the card, the file numbering restarts from 0001. This is convenient if you want to organize images according to cards. However, if the replacement card contains images recorded previously, the file numbering of the new images might continue from the file numbering of the existing images in the card. To restart the file numbering from 0001, you should use a newly-formatted card.
Handy Features 3 Auto Image Rotation Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and personal computer instead of horizontally. The setting of this feature can be changed. Under the [5] tab, select [Auto rotate], then press <0>. Follow the steps below to select the desired setting, then press <0>. [OnPD]: The vertical image is automatically rotated on both the camera’s LCD monitor and on the personal computer.
Handy Features B Checking Camera Function Settings While the menu is displayed, press the button to display the camera’s current settings. While the menu is displayed, press the button to display the settings. Press the button again to return to the menu. Press the shutter button halfway to return to the shooting settings display. Settings Display Card remaining capacity Color space (p.87) WB correction (p.92)/ WB bracketing (p.93) Live View shooting (p.95) Red-eye reduction (p.
Handy Features 3 Reverting the Camera to the Default SettingsN This is for reverting all the camera’s shooting settings and Custom Functions to the default settings. This works in the and other Creative Zone modes. 1 Select [Clear settings]. Under the [7] tab, select [Clear settings], then press <0>. the desired setting. 2 Select To revert the shooting settings to the default, select [Clear all camera settings], then press <0>.
Handy Features 3 Setting the LCD Monitor Off/On You can enable or disable the LCD monitor’s shooting settings display (p.42) from turning on when the shutter button is pressed halfway. Under the [5] tab, select [LCD off/on btn], then press <0>. Select one of the settings below, then press <0>. [Shutter btn.]: The display turns off when you press the shutter button halfway, and reappears when you let go of the shutter button.
3 Flash ControlN The built-in flash and external Speedlite can also be set with the menu. The menu for the external Speedlite will be applicable only to EX-series Speedlites whose functions can be set with the camera. Select [Flash control]. Under the [6] tab, select [Flash control], then press <0>. X The flash control screen will appear. [Flash firing] Normally, set this to [Enable]. If [Disable] is set, both the built-in flash and external Speedlite will not fire.
3 Flash ControlN E-TTL II For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene as with an external metering flash. Flash exposure compensation may be necessary depending on the scene, so this is for advanced users. Setting the External Speedlites Select either [External flash func. setting] or [External flash C.Fn setting].
3 Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not be aware of this operation. However, you can execute the sensor cleaning at anytime as well as disable it. Cleaning the Sensor Now 1 Select [Sensor cleaning]. Under the [6] tab, select [Sensor cleaning], then press <0>. [Clean nowf]. 2 Select Select [Clean nowf], then press <0>.
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by Digital Photo Professional (provided software) to erase the dust spots automatically. Preparation Get a solid-white object (paper, etc.). Set the lens focal length to 50mm or longer.
3 Appending Dust Delete DataN a solid-white object. 3 Photograph At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in the aperture-priority AE mode with an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. X When the picture is taken, the camera will start obtaining the Dust Delete Data.
3 Manual Sensor CleaningN Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera. 1 Select [Sensor cleaning]. Under the [6] tab, select [Sensor cleaning], then press <0>. [Clean manually]. 2 Select Select [Clean manually], then press <0>.
3 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to <2>. • Opening the battery compartment cover. • Opening the card slot cover. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor.
7 Image Playback This chapter explains features related to viewing images. Learn more about image playback as discussed in chapter 2 “Basic Shooting and Image Playback” and how to view images on a TV set. You can also erase images. About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a personal computer or whose file name was changed.
x Searching for Images Quickly H Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. 1 Î Turn on the index display. During image playback, press the button. X The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame. Press the button again to switch to the 9-image index display. Î the image. 2 Select Turn the <6> dial to select an adjacent image.
x Searching for Images Quickly Jump through Images (Jump display) When the card contains many images, you can browse through them by 10 or 100 images at a time. Also, if the images were shot on different days, you can browse through them by date. This browsing technique is called jump. 1 Jump method Image location Select the jump method. In the single image display mode, press the key. X On the bottom right, the jump method and current image location are indicated.
u/y Magnified View Magnify the image. During image playback, press the button to magnify the image. If you keep pressing the button, you can magnify the image up to 10x. Use the keys to scroll around the magnified image. Press the button to reduce the magnification. To exit the magnified view, press the button. The single-image view will return. Magnified area You can turn the <6> dial to view another image with the magnification maintained.
3 Auto Playback You can playback the images in the card as an automatic slide show. Each image will be displayed for about 4 sec. 1 Select [Auto play]. Under the [3] tab, select [Auto play], then press <0>. X The auto play screen will appear. the auto play. 2 Start X After [Loading image...] is displayed Ð for a few seconds, auto play will start. To pause the auto play, press <0>. During pause, [ ] will be displayed on the upper left of the image. Press <0> again to resume the auto play.
Viewing the Images on TV With the video cable provided with the camera, you can connect the camera to a TV set and view images on the TV screen. Turn off the camera and the television before connecting them. 1 Connect the camera to the TV. Open the camera’s terminal cover. Use the video cable (provided) to connect the camera’s <1> video OUT terminal to the TV monitor’s VIDEO IN terminal. Insert the cable plug all the way in. on the TV and switch the 2 Turn TV’s line input to VIDEO IN.
K Protecting Images Protecting the image prevents it from being erased accidentally. 1 Image protect icon Select [Protect images]. Under the [3] tab, select [Protect images], then press <0>. X The protect setting screen will appear. the image and protect it. 2 Select Press the key to select the image to be protected, then press <0>. X When an image is protected, the icon will appear on the screen. To cancel the image protection, press <0> again. The icon will disappear.
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.129) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect it. Erasing a 1+73 image will erase both the RAW and JPEG images. Erasing a Single Image 1 Playback the image to be erased. the button.
B Shooting Information Display When you press the button during single-image playback, you can switch to the shooting information display. The most detailed shooting information is shown below.
B Shooting Information Display About the Histogram The brightness histogram display shows the exposure level distribution, overall brightness, and gradation. And the RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [3 Histogram] menu. [Brightness] Display Sample Histograms This histogram is a graph showing the distribution of the image’s brightness level.
8 Printing Images and Transferring Images to a Computer Printing (p.134) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. The Web site below gives more information on using your Canon camera with various printers, such as which paper types to use. http://canon.com/pictbridge/ Digital Print Order Format (DPOF) (p.
Preparing to Print You do the direct printing procedure entirely with your camera while you look at the LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power switch to <2>. the printer. 2 SetForupdetails, see the printer’s instruction manual. the camera to the 3 Connect printer. Use the interface cable that came with the camera. When connecting the cable plug to the camera’s terminal, the cable plug’s icon must face the front side of the camera.
Preparing to Print wPictBridge the image. 6 Playback Press the button. X The image will appear, and the icon will appear on the upper left to indicate that the camera is connected to a printer. X The button lamp will light in blue. RAW images are not compatible with direct printing. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. When connecting the camera to the printer, do not use any cable other than the interface cable provided.
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the icon is displayed on the upper left of the LCD monitor. Press the key to select the image to be printed. <0>. 2 Press X The print setting screen will appear. Print setting screen Sets the printing effects. (p.
wPrinting QSetting the Paper Size Select the size of the paper loaded in the printer, then press <0>. X The paper type screen will appear. YSetting the Paper Type Select the type of the paper loaded in the printer, then press <0>. When using a Canon printer and Canon paper, read the printer’s instruction manual to check what paper types can be used. X The page layout screen will appear. USetting the Page Layout Select the page layout, then press <0>. X The print setting screen will reappear.
wPrinting effects. 4 SetSettheasprinting necessary. If you need not set any printing effects, go to step 5. The screen display may differ depending on the printer. Select the option on the upper right, then press <0>. Select the desired printing effect, then press <0>. If the icon is displayed next to , you can also adjust the printing effect. (p.140) Printing Effect Description EOff Same as the printing characteristics turned “On”. No automatic correction will be performed.
wPrinting * When you change the printing effects, it is reflected in the image displayed on the upper left. Note that the printed image might look slightly different from the displayed image which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 140. the date and file number 5 Set imprinting. Set as necessary. Select , then press <0>. Set as desired, then press <0>. of copies. 6 SetSettheasnumber necessary. Select , then press <0>.
wPrinting e Adjustment of Printing Effects In step 4 on page 138, select the printing effect. When the icon is displayed next to , press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast.
wPrinting Trimming the Image You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [Trimming]. 2 Set the trimming frame size, position, and proportion. The image area within the trimming frame will be printed.
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
W Digital Print Order Format (DPOF) Set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options 1 Select [Print order]. X Under the [3] tab, select [Print order], then press <0>. [Set up]. 2 Select Select [Set up], then press <0>. as desired. 3 SetSetthetheoptions [Print type], [Date], and [File No.]. Select the option, then press <0>.
W Digital Print Order Format (DPOF) Print type Date File No. K Standard Prints one image on one sheet. L Index Multiple, thumbnail images are printed on one sheet. K L Both Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the file No. on the print. 4 Exit the setting. Press the <7> button. X The print order screen will reappear. Next, select [Sel.Image] or [All image] to order the images to be printed.
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. Press the button to display the three-image view. To return to the singleimage display, press the button. After completing the print order, press the button to save the print order to the card. Quantity Total images selected Check mark Index icon [Standard] [Both] Press the key to set the number of copies to be printed for the displayed image.
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. 1 Prepare to print. See page 134. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [3] tab, select [Print order]. 3 Select [Print]. [Print] will be displayed only if the camera is connected to the printer and printing is possible. 4 Set the [Paper settings]. (p.136) Set the printing effects (p.138) if necessary. 5 Select [OK]. Before printing, be sure to set the paper size.
d Transferring Images to a Personal Computer By connecting the camera to a personal computer, you can transfer images from the camera’s card by operating the camera. This is called direct image transfer. Before connecting the camera to the personal computer, be sure to install the bundled software (EOS DIGITAL Solution Disk/CD-ROM) in the personal computer. For instructions on how to install the software, see “CD-ROM Guide.” Preparation for Image Transfer 1 Connect the camera to the personal computer.
d Transferring Images to a Personal Computer Shooting will be disabled while the direct transfer screen is displayed. If the [EOS Utility] screen does not appear, see Software Instruction Manual in the CD-ROM. Before disconnecting the cable, turn off the camera. Pull out the cable by grasping the plug (instead of the cord).
d Transferring Images to a Personal Computer Select & transfer Press the key to select images one by one to be transferred to the personal computer. To exit, press the button. Wallpaper The image you select and transfer will appear as the personal computer’s wallpaper. To exit, press the button. If you press <0> instead of the button, the confirmation dialog will appear. Select [OK], then press <0> to start the transfer. RAW images cannot be transferred as wallpaper.
d Transferring Images to a Personal Computer the image to be 3 Select transferred. Press the key to select an image, then press the key to place a checkmark on the upper left. Repeat this step for all the images you want to transfer. You can select up to 998 images to be transferred. Press the button twice to save the image selections to the card. The menu will then reappear. About [All image] In step 2, if you select [All image], the screen on the left will appear.
9 Customizing the Camera You can customize various camera features to suit your picture-taking preferences. You can do it with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
3 Setting Custom FunctionsN 1 Custom Function No. Select [Custom Functions (C.Fn)]. Under the [7] tab, select [Custom Functions (C.Fn)], then press <0>. the Custom Function No. 2 Select Press the key to select the number of the Custom Function to be set, then press <0>. the setting as desired. 3 Change Press the key to select the desired setting (number), then press <0>. Repeat steps 2 and 3 if you want to set other Custom Functions.
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure 1 Exposure level increments 2 Flash sync. speed in Av mode C.Fn II: Image 3 Long exposure noise reduction 4 High ISO speed noise reduction 5 Auto Lighting Optimizer C.Fn III: Auto focus/Drive 6 AF-assist beam firing 7 AF during Live View shooting 8 Mirror lockup C.Fn IV: Operation/Others 9 Shutter/AE lock button 10 SET button when shooting 11 LCD display when power ON 12 Add original decision data p.154 p.155 p.156 p.157 p.158 p.
3 Custom Function SettingsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Auto focus/Drive, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.
3 Custom Function SettingsN C.Fn II: Image C.Fn-3 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures 1 sec. or longer. The [On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.
3 Custom Function SettingsN C.Fn-5 Auto Lighting Optimizer 0: Enable If the image comes out too dark or the contrast is too low, the image brightness and contrast are corrected automatically. (Depending on the shooting conditions, image noise may increase.) This function will not work with manual exposures nor 1 and 1+73 images. In the Basic Zone modes, the Auto Lighting Optimizer will operate automatically.
3 Custom Function SettingsN C.Fn III: Auto focus/Drive C.Fn-6 AF-assist beam firing The AF-assist beam can be emitted by the camera’s built-in flash or by the external, EOS-dedicated Speedlite. 0: Enable 1: Disable AF-assist beam not emitted. 2: Only external flash emits If an external, EOS-dedicated Speedlite is attached, it will emit the AFassist beam when necessary. The camera’s built-in flash will not emit the AF-assist beam.
3 Custom Function SettingsN C.Fn IV: Operation/Others C.Fn-9 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF Convenient when you want to focus and meter separately. Press the button to autofocus and press the shutter button halfway to attain AE lock. 2: AF/AF lock, no AE lock In the AI Servo AF mode, you can press the button to stop the AF operation momentarily. This prevents the AF from being thrown off by any obstacle passing between the camera and subject.
3 Custom Function SettingsN If the [Live View shoot.] menu has been set to [Enable], the Live View shooting will override any setting from 1 to 4. When the camera is ready to shoot, pressing <0> will show the Live View image instead. C.Fn-11 LCD display when power ON 0: Display When the power switch is turned on, the shooting settings will be displayed (p.42).
3 Registering My MenuN For faster access, you can register up to six menus and Custom Functions whose settings you change frequently. 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. [Register]. 2 Select Select [Register], then press <0>. the desired menus. 3 Register Select a menu, then press <0>. When the confirmation dialog appears and you select [OK] and press <0>, the menu will be registered. Repeat this procedure to register up to six menus.
10 Reference This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up things.
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light blinks) with certain subjects such as the following: Subjects difficult to focus Low-contrast subjects Example: Blue sky, solid-color walls, etc. Subjects in low light Extremely backlit or reflective subjects Example: Car with a reflective body, etc. Near and far subjects covered by an AF point Example: Animal in a cage, etc. Repetitive patterns Example: Skyscraper windows, computer keyboards, etc.
Using a Household Power Outlet With AC Adapter Kit ACK-E5 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. the DC Coupler DR-E5. 2 Connect Connect the cord’s plug to the DC Coupler DR-E5. the DC Coupler. 3 Insert Open the cover and insert the DC Coupler until it locks in place. in the DC cord.
Using the Remote Switch Remote Switch RS-60E3 (Sold separately) Remote switch with a 60 cm/2.0 feet cord for pressing the shutter button halfway or completely. It connects to the camera’s remote control terminal. The camera is not compatible with Remote Controller RC-1 and RC-5 (both sold separately).
Using the Remote Switch Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover (p.22) attached to the camera strap. 1 Remove the eyecup. Push the bottom of the eyecup upward. the eyepiece cover. 2 Attaching Slide the eyepiece cover down into the eyepiece groove to attach it.
External Speedlites EOS-dedicated, EX-series Speedlites Basically operates like a built-in flash for easy operation. When an EX-series Speedlite is attached to the camera, almost all the autoflash control is done by the camera. In other words, it is like a highoutput flash attached externally in place of the built-in flash. For detailed instructions, see the EX-series Speedlite’s instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites.
External Speedlites Canon Speedlites other than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to (manual exposure) or (aperture-priority AE) and shoot. When using a Speedlite which has manual flash mode, shoot in the manual flash mode. With an EX-series Speedlite set to TTL autoflash with the flash’s Custom Function, the flash will fire at full output only.
Menu Settings 1 Shooting 1 (Red) page Quality 73 / 83 / 74 / 84 / 76 / 86 / 1+73 / 1 Red-eye On/Off Off / On 59 Beep On / Off 108 Shoot w/o card On / Off 108 Review time Off / 2 sec. / 4 sec. / 8 sec.
Menu Settings 5 Set-up 1 (Yellow) page Auto power off 30 sec. / 1min. / 2 min. / 4 min. / 8 min. / 15 min. / Off 109 File numbering Continuous / Auto reset / Manual reset 110 Auto rotate On PD / On D / Off 112 Format Initialize and erase data in the card 40 LCD off/on btn Shutter btn. / Shutter/DISP / Remains on 115 Screen color Select the background color 115 LCD brightness Seven brightness levels provided 109 Date/Time Set the date (year, month, day) and time (hour, min., sec.
Function Availability Table o: Set automatically k: User selectable Mode Dial Basic Zone Quality ISO speed 2 3 4 5 6 7 d k k k k k k k k k k k k RAW k k k k k RAW + 73 k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k Neutral k k k k k Faithful k k k k k Monochrome k k k k k User Defined k k k k k k k k k k k k k k k k k k k k Preset WB k k k k k Custom WB k k k k k WB correction k k k
Function Availability Table o: Set automatically k: User selectable Mode Dial Basic Zone : Not selectable Creative Zone Metering mode Exposure 1 2 3 4 5 6 7 d o o o o o o o k k k k k Partial k k k k k Center-weighted average k k k k k Program shift k Exposure compensation k k k AEB k k k AE lock k k k Depth-of-field preview k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k Evaluative Single o Drive
Troubleshooting Guide If there is a problem, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power The camera does not operate even when the power switch is set to <1>. The battery is not properly installed in the camera. (p.26) Recharge the battery. (p.24) Make sure the battery compartment cover is closed. (p.26) Make sure the card slot cover is closed. (p.31) Press the button. (p.
Troubleshooting Guide Shooting No images can be shot or recorded. The card is not properly inserted. (p.31) If the card is full, replace the card or delete unnecessary images to make room. (p.31, 130) If you try to focus in the One-Shot AF mode while the focus confirmation light in the viewfinder blinks, a picture cannot be taken. Press the shutter button halfway again to focus, or focus manually. (p.37, 62) Slide the card’s write-protect switch to the Write/Erase setting. (p.
Troubleshooting Guide The built-in flash does not fire. If you shoot continuously with the built-in flash at short intervals, the flash might stop operating to protect the flash unit. Image Review & Operation The image cannot be erased. If the image has been erase-protected, it cannot be erased. (p.129) The shooting date and time displayed is incorrect. The correct date and time has not been set. (p.29) No image appears on the TV screen. Make sure the video cable plug is connected all the way in. (p.
Error Codes Error code Countermeasures If there is a problem with the camera, an error message appears. Follow the onscreen instructions. To recover from the error screen, turn the power switch off and on, or remove and reinstall the battery. If error 02 (Card problem) is displayed, remove and reinstall the card or format the card. This may resolve the problem. If the same error keeps occurring, there may be a problem. Write down the error code and consult your nearest Canon Service Center.
System Map Eyepiece Extender EP-EX15ll ST-E2 Rubber Frame Ef E-series Dioptric Adjustment Lenses 220EX 430EX II 580EX II Macro Ring Lite MR-14EX Macro Twin Lite MT-24EX Bundled Accessories Eyecup Ef Angle Finder C Semi Hard Case EH19-L Wide Strap EW-100DB lll Battery Pack LP-E5 AC Adapter Kit ACK-E5 Battery Grip BG-E5 Battery Charger LC-E5 or LC-E5E DC Coupler DR-E5 Car Battery Charger CBC-E5 Battery Magazine BGM-E5L for two LP-E5 battery packs 176 Battery Magazine BGM-E5A for size-AA batterie
System Map EF lenses EF-S lenses Remote Switch RS-60E3 Video Cable VC-100 EOS DIGITAL Solution Disk TV/Video Software Instruction Manual PictBridge-compatible printer Interface Cable IFC-200U Interface Cable IFC-500U USB port Original Data Security Kit OSK-E3 Card reader SD memory card/ SDHC memory card PCMCIA adapter PC card slot Personal computer Windows Vista Windows XP Windows 2000 Mac OS X 177
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD memory card, SDHC memory card 22.2 mm x 14.8 mm Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is approx.1.
Specifications Color temperature compensation: White balance correction: ±9 stops in full-stop increments White balance bracketing: ±3 stops in full-stop increments * Blue/amber direction or magenta/green direction possible Color temperature information transmission: Provided Noise reduction: Noise reduction for long exposures High ISO speed noise reduction Automatic image brightness correction: Auto Lighting Optimizer Add original image verification data: Provided (Verified by Original Data Security Kit
Specifications • Exposure Control Metering modes: Metering range: Exposure control: 35-zone TTL full-aperture metering • Evaluative metering (linkable to any AF point) • Partial metering (approx. 10% of viewfinder at center) • Center-weighted average metering EV 1 - 20 (at 23°C/73°F with EF50mm f/1.
Specifications • External Speedlite Compatible flash: Flash metering: Flash exposure compensation: FE lock: External flash settings: Zooming to match lens focal length: EX-series Speedlites E-TTL II autoflash ±2 stops in 1/3- or 1/2-stop increments Provided Flash function settings, Flash C.Fn settings Provided • Drive System Drive mode: Single shooting, continuous shooting, self-timer (10-sec., 2-sec., multiple shots) Continuous shooting speed: JPEG: Max. approx. 3 shots/sec. RAW: Max. approx. 1.
Specifications Brightness adjustment: 7 levels provided Interface languages: 20 • Image Playback Display format: Highlight alert: Single image, single image + image-recording quality, shooting information, histogram, 4- or 9-image index, magnified view (approx. 1.
Specifications Battery life: [Number of shots • approx.] Temperature Shooting Conditions No Flash 50% Flash Use At 23°C / 73°F 600 500 At 0°C / 32°F 500 400 * With fully-charged Battery Pack LP-E5 * The figures above are based on CIPA (Camera & Imaging Products Association) testing standards Battery check: Auto Provided. Power turns off after 30 sec., 1, 2, 4, 8, or 15 min. Power saving: Date/time backup battery: Built-in secondary battery Startup time: Approx. 0.1 sec.
Specifications • Battery Charger LC-E5E Compatible battery: Power cord length: Recharging time: Rated input: Rated output: Working temperature range: Working humidity: Dimensions (W x H x D): Weight: Battery Pack LP-E5 Approx. 2 m / 6.6 ft. Approx. 2 hours 100 - 240 V AC (50/60 Hz) 8.4 V DC / 700 mA 0°C - 40°C / 32°F - 104°F 85% or less 67 x 26 x 87.5 mm / 2.6 x 1.0 x 3.4 in. Approx. 75 g / 2.6 oz. • EF-S18-55mm f/3.5-5.
Specifications • EF-S18-55mm f/3.5-5.6 II Angle of view: Lens construction: Minimum aperture: Closest focusing distance: Max. magnification: Field of view: Diagonal extent: 74°20’ - 27°50’ Horizontal extent: 64°30’ - 23°20’ Vertical extent: 45°30’ - 15°40’ 11 elements in 9 groups f/22 - 36 0.28 m / 0.92 ft. (From image sensor plane) 0.28x (at 55 mm) 248 x 161 - 81 x 54 mm / 9.8 x 6.3 - 3.2 x 2.1 in. (at 0.28 m) Filter size: 58 mm Max. diameter x length: Approx. 68.5 x 66 mm / 2.7 x 2.6 in.
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
Digital Camera Model DS126191 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E5 & LC-E5E. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product using the battery pack. 3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E5. Other types of batteries may burst, causing personal injury and other damage. 4.
MEMO 190
Index A Access lamp....................................32 A-DEP (Automatic depth-of-field AE)..........76 Adobe RGB.....................................87 AE lock............................................88 AEB (Auto Exposure Bracketing)....80 AF J Focusing AI Focus AF ....................................60 C Camera Clear camera settings .............. 114 Holding the camera.................... 36 Camera shake ................... 35 - 37, 94 Image Stabilizer ......................... 35 Card.............
Index Dust ........................................34, 118 Dust Delete Data ..........................119 E Flash exposure compensation......................... 79, 116 1/2-stop increments ................. 154 Focus lock ...................................... 46 Erase (image) ...............................130 Focus mode switch .................. 33, 62 Error..............................................175 Focusing AF mode .................................... 60 AF point selection .................
Index I L Image Auto playback ...........................127 Erase ........................................130 Highlight....................................131 Histogram .................................132 Index.........................................124 Jump.........................................125 Magnified ..................................126 Playback .............................54, 123 Protect ......................................129 Review time ..............................108 Rotate ......
Index Mirror lockup ...........................94, 157 PictBridge..................................... 133 Mode Dial J Shooting mode Picture Style Customize.................................. 82 Selection .................................... 67 User defined .............................. 85 Monitor J LCD monitor Monochrome image ........................68 My Menu .......................................160 N Pixel count selection ...................... 64 Playback J Image Neutral .....................
Index Revert to default settings ..............114 Rotate (image) ......................112, 126 S Safety warnings ............................186 Saturation........................................83 SD card J Card Self-timer.........................................53 Sensor J Image sensor Sepia (Monochrome) ......................84 Servo AF .........................................60 Sharpness.......................................83 Shooting information display.........131 Shooting mode.................
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
