Owner's Manual
Table Of Contents
- Pocket Guide
- Owners Manual
- Conventions Used in This Manual
- Table of Contents
- Quick Start
- Supplied Accessories
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Power On
- Installing & Removing a CF Card
- Mounting & Detaching a Lens
- Lens Image Stabilizer
- Basic Operation
- Using the Quick Control Screen
- Menu Operations
- Setting the Language
- Date & Time Set
- Formatting a CF Card
- Auto Power-Off
- Restore Default Settings
- Basic Shooting
- Image Settings
- Setting the Auto Focus & Drive Modes
- Advanced Operations
- Live View Shooting & Movies
- Image Playback
- Sensor Cleaning
- Printing Images & Transferring Images to a Computer
- Customizing the Camera
- Checking Camera Settings
- Checking Battery Information
- Optional Accessories
- Replacing Date / Time Battery
- Function Availability Table
- Menu Settings
- Troubleshooting
- Error Codes
- System Map
- Specs
- Index
- Software Information
- Note - Playback Movies from the Computer on the Camera
- Accessory Brochure
- Warranty
Silent Shooting
*:
Below are instructions for setting the
[~:
Live
View/Movie
func.
set.] menu's [Silent
shoot.].
•
Mode
1
The shooting operation noise
is
quieter than with normal shooting
through the viewfinder. When you set the drive mode to
<~>,
you
can shoot continuously at approx. 3 fps.
•
Mode
2
When you press the shutter button completely, only one shot will be
taken. While you keep holding down the shutter button, the camera
operation will
be
suspended. Then when you return to the shutter
button's halfway position, the camera operation will resume. The
shooting noise is thereby minimized. Even if the current drive mode
is
set to continuous, only a single shot will
be
taken.
• Disable
If you use a TS-E lens to make
vertical
shift
movements
or use
an
Extension Tube,
be
sure to set this to [Disable]. Setting it to [Mode
1] or [Mode
2]
will result
in
incorrect or irregular exposures.
When you press the shutter button completely, the shutter will sound
like it took two shots. However, only one shot will be taken.
--
• If you use flash, the [Disable] operation will take effect even if you had
set it to [Mode 1] or [Mode
2]
.
• When using a non-Canon flash unit, set it to [Disable]. The flash will not
fire if it
is
set to [Mode 1] or [Mode
2].
• If [Mode
2]
is
set and you use a remote controller
(p.1
02) to shoot, the
operation will
be
the same as with [Mode 1].
120