Owner's Manual

~+ Transferring Images to a Personal Computer
By connecting the camera to a personal computer, you can transfer
images from the camera's card by operating the camera.
This feature is
called direct image transfer.
__ Before connecting the camera to a personal computer, be sure
to install the provided software (EOS DIGITAL Solution Disk
on CD-ROM) in the personal computer.
For instructions to install the provided software, see the separate
sheet,
CD-ROM Guide.
Connect the camera to the
personal computer.
Use the interface cable provided with
the camera.
•
When connecting the cable plug to
the camera's < ~ > terminal, the
cable plug's
< ~ > icon must face the
front side of the camera.
Connect the plug on other end of the
cable to the personal computer's
USB port.
Preparation for Image Transfer
1 Set the camera's power switch to
<OFF>.
2
Set the camera's power switch to
<ON>.
When the program selection screen
appears on the personal computer, I
select [EOS Utility].
.. The [EOS Utility] screen will appear
on the computer, and the direct image
transfer screen will
appear all the
camera's
LCD monitor.
167