Owner's Manual

• r T • _ ,.,
. . .,
CFn I :Ex.posure
CFn II :Image
C Fn III AUlofocus/Drive
C Fn [if :Operation/Others
Clear all Custom Func. (C.Fn)
mmn Setting Custom Functions"*
1 Select [.Q.].
• Turn the <8> dial to select the [,Q.]
tab.
2 Select the group.
• Turn the <0> dial to select C.Fn 1-
IV, then press <@>.
1
..
..
Custom Function No. 3 Select the Custom Function
number.
• Turn the < 0 > dial to select the
Custom Function No., then press
<@>.
C.Fn I :Exposure
Exposure level increments
0: 1/3-stop
1:'/2·stop
4
Change the setting as desired.
• Turn the < 0 > dial to select the
setting (number), then press
<@>.
• Repeat steps 2 to 4 if you want to set
other Custom Functions.
• At the bottom
of the screen, the
current Custom Function settings are
indicated below the respective
function numbers.
5 Exit the setting.
• Press the <MENU> button.
• The screen for step 2 will reappear.
Clearing All Custom Functions
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.
[II Even after all the Custom Functions are cleared, the setting for [,g,C.Fn IV •
5:
Focusing Screen] will remain unchanged.
172