Owner's Manual

Turning on the Power
~ - .... ~ ~ .. ' ~ ~ ':_~". _. _ ~.. •• • ~ .... _ _.. , .... ':.-'" _ " •• ~ r ~ ~ "_ '. .. ,.,i l
< OF F> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
<ON> : The camera turns on.
<...-J> : The camera and <0 > operate
(p.37).
About the Automatic Self-Cleaning Sensor
• Whenever you set the power switch to < 0 NI ........ > or < 0 FF>, the
sensor cleaning will be executed automatically. During the sensor
cleaning, the LCD monitor will display
< :0' >. Even during the
sensor cleaning, you can still shoot by pressing the shutter button
halfway (p.35) to stop the sensor cleaning and take a picture.
• If you turn
on/off the power switch <ON/...-J>I<OFF> at a short
interval, the
< ,+0- > icon might not be displayed. This is normal and
not a problem.
About Auto Power Off
• To save battery power, the camera turns off automatically after about
1 minute
of non-operation. To turn on the camera again, just press
the shutter button halfway (p.35).
• You can change the auto power-off time with the menu's
[~. Auto
power off] setting (p.44).
[j If you set the power switch to < OFF> while an image is being recorded to
the card,
[Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
27
I