Owner's Manual

About the Lens Image Stabilizer
When you use the IS lens' built-in Image Stabilizer, camera shake is
corrected to obtain a less blurred shot. The procedure explained here is
based on the EF24-1 05mm f/4L IS USM lens as an example.
* IS stands for Image Stabilizer.
1 Set the IS switch to <ON>.
• Set the camera's power switch to
<ON>.
2
3
Press the shutter button halfway.
~ The Image Stabilizer will operate.
Take the picture.
• When the picture looks steady in the
viewfinder, press the shutter button
completely to take the picture.
I
-- • The Image Stabilizer is not effective for moving subjects.
• The Image Stabilizer may not be effective for excessive shaking such as
on a rocking boat.
• If you use the EF24-105mm f/4L IS USM lens for panned shots,
correction
of camera shake might not be so effective.
[l] • The Image Stabilizer can operate with the focus mode switch set to
either <AF> or <MF>.
• If the camera is mounted on a tripod, you can save battery power by
switching the IS switch to
<OFF>.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
33