Owner's Manual

~!~ Using the Quick Control Screen
The shooting settings are displayed on the LCD monitor where you can
quickly select and set the functions. This is called the Quick Control
screen.
1 Display the Quick Control screen.
• Press < ~f~ > straight down.
~ The Quick Control screen will appear.
(010 )
2 Set the desired setting.
• Use < ~f~ > to select a function.
• In the <0> (Full Auto) mode, you
can select certain drive modes (p.85)
and the image-recording quality
(p.54).
... A brief description of the selected
function is displayed on the screen's
bottom.
• Turn the <0> or <B> dial to
change the setting.
P/Tv/Av/M/B
3 Take the picture.
• Press the shutter button completely to
take the picture.
~ The LCD monitor turns off and the
captured image is displayed.
-- If [.9.C.Fn 111-3: AF point selection method] is set to [1: Multi-controller
direct], the Quick Control screen cannot be displayed (p.179).
Eil Regarding the <@» (Creative Auto) mode, see page 51.
38