Owner's Manual

[f]
LCD brightness Auto
Date/Time 09/171'0813:10
---- ------- - ----_.~--- ---
La~_~9_e_~~ _
Before You Start
Im:m:J Setting the Interface Language
1 Select [Language] .
• Under the [~:] tab, select
[Language] (the third item from the
top), then press
< @ >.
2 Set the desired language .
• Turn the <0> or <to?s> dial to select
the language, then press
< @ >.
~ The language will change.
Im:m:J Setting the Date and Time
Check if the camera's date and time are set correctly. If necessary, set
the correct date and time.
I [f]
LCD brightness Auto
. ----- ---------- ----
Date/Time 091171'0813:10
----
DatefTime
Set Date/Time
...
09 . 17 . 2008 0 _~ 10: 00
..
mm/ddfyy
(0911712008)
OK Cancel
1 Select [Date/Time].
• Under the [~:] tab, select [Datel
Time], then press <@>.
2 Set the date, time and date display format.
• Turn the <0 > dial to select the number.
• Press < @> so ¢ is displayed.
• Turn the <0 > dial to select the desired
setting, then press <@ > (Returns to D ).
3 Exit the setting.
• Turn the < 0 > dial to select [OK],
then press
< @ >.
~ The date/time will be set and the
menu will reappear.
r=iI It is important to set the correct date/time because it will be recorded
together with each captured image.
42