Owner's Manual

li!1ImIJ File Numbering Methods
The file number is like the frame number on a roll of film. The captured
images are assigned a sequential file number from 0001 to 9999 and
saved in one folder. You can change how the file number is assigned.
The file number will appear on a personal computer in this format:
IMG 0001.JPG.
1 Select [File numbering] .
• Under the [~'] tab, select [File
numbering], then press <@ >.
2
Select the file numbering method.
• Turn the < 0 > dial to select the
desired method, then press <@ >.
Continuous
Continues the file numbering sequence even after the card is
replaced or a new folder is created.
Even after you replace the card or create a new folder, the file
numbering continues in sequence up to 9999. This is convenient when
you want to save the images numbered anywhere between 0001 to
9999 in multiple cards or folders into one folder in your personal
conlputer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images rnight
continue from the file numbering of the existing images in the card or
folder. If you want to use continuous file numbering, you should use a
newly-formatted card each time.
74
File numbering after
replacing the card
Card-1 Card-2
CLJ511 .....
Next sequential file
File numbering after
creating a folder
Card-1
100 '"----.
0 .....
XXX-0051