Owner's Manual
Table Of Contents
- Owners Manual
- Setting the Date / Time (Menu Operation)
- Table of Contents
- Conventions Used in This Manual
- Quick Start Overview
- Supplied Accessories
- Parts & Controls
- Getting Started
- Basic Shooting
- Image Settings
- Setting the AF (Auto Focus) & Drive Modes
- Advanced Operations
- Live View Shooting
- Image Playback
- Sensor Cleaning
- Printing Images
- Transferring Images to a Personal Computer
- Customizing the Camera
- Checking Camera Settings
- Optional Accessories
- Replacing Date / Time Battery
- Menu Settings Table
- Function Availability Table
- Troubleshooting
- Error Codes
- System Accessory Map
- Specs
- Index
- Pocket Guide
- 28mm-135mm Lens Instruction Guide
- Software Installation Sheet
- Great Photography is Easy Brochure
- Do More with Macro Brochure
- Warranty
Bulb Exposures
Using
the
Eyepiece
Cover
If you take a picture without looking at the viewfinder, light entering the
eyepiece can throw off the exposure.
To
prevent this, use the eyepiece
cover (p.23) attached to the camera strap.
1 Remove the eyecup.
• Push the bottom
of
the eyecup
upward.
Attaching the eyepiece cover.
• Slide the eyepiece cover down into
the eyepiece groove to attach it.
Connecting the Remote Switch
You can connect the Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) or any EOS accessory
equipped with an N3-type terminal to the camera and shoot with
it.
To
operate the accessory, refer to its instruction manual.
I
Open the terminal cover.
Connect the plug to the remote
control terminal.
• Connect the plug as shown
in
the
illustration.
To
disconnect the plug, grasp the
plug's silver part and
pullout.
105