Owner's Manual

Using the Built-in Flash
mt· Flash Exposure Compensation "*
In the same way as normal exposure compensation, you can set exposure compensation
for ftash. You can set flash exposure compensation up to ±2 stops in 1/3-stop increments.
I
Set the exposure compensation amount.
• While looking at the LCD panel or
viewfinder, turn the < 0 > dial.
•
To cancel the flash exposure
compensation, set the flash exposure
compensation amount back to
<; >.
• When you press the shutter button
halfway, the
< ~ > icon will be displayed
in the viewfinder and on the LCD panel.
3 Take the picture.
2
I 1 Press the < ISO·~ > button. (06)
Increased exposure
t-----/
J
~ J
-2 •• 1 .• ' •• ~.:2ISolaa
Decreased exposure
l----/J ~ J
-2 •• ~ •• ' •• 1.:2IS0:aa
-- • If [.~.C.Fn II -4: Auto Lighting Optimizer] (p.177) has been enabled,
the effect of the exposure compensation and flash exposure
compensation might be minimized. Set it to [3: Disable] if you want to
obtain
the best results of the exposure compensation setting.
• If
you set flash exposure compensation with both the EX-series Speed lite and
camera, the Speedlite's flash exposure compensation setting will override the
camera's. If you set EX-series Speed lite's flash exposure compensation with the
Speedlite, any flash exposure compensation set with the camera will be overridden.
[]] • The exposure compensation amount will remain in effect even after you
set the power switch to < OFF>.
• The procedure is the same when using an EX-series Speedlite. The
Speedlite's flash exposure compensation can be set with the camera.
109