Owner's Manual

IE3mJ Flash Control *
The built-in flash and an external Speedlite can also be set with the
menu. The menu for the external Speedlite will be applicable only to
EX-series Speedlites whose functions can be set with the camera.
INFO. button Normal disp.
Flastlcontrol-----·- --
----
Camera user setting
Clear settings
Firmware Ver. 1.0.0
About [Flash firing]
Flash control
Flc!~. firintJ__ En,!bl~_
Built-in flash tunc. setting
External flash tunc. setting
External flash C.Fn setting
Select [Flash control].
• Under the [~:] tab, select [Flash
control], then press < § >.
~ The flash control screen will appear.
• Normally, set this to [Enable].
•
If [Disable] is set, both the built-in
flash and external Speedlite will
not fire. This is useful when you only
want to use the AF-assist beam.
About [Built-in flash func. setting]
• [Flash mode] cannot be selected.
• [Flash expo
camp] can be set as
explained on page 109.
• Set [E-TTL II] as explained on the
next page.
•
Shutter sync.
Normally, set this to [1 st curtain] so that the flash fires immediately
after the exposure starts.
If [2nd curtain] is set, the flash will fire right before th~ ~}(pCSUr~
ends. When this is combined with a slow sync speed, you can create
a trail
of light such as from car headlights at night. With 2nd curtain
sync, two flashes will be fired, once when you press the shutter
button completely, and once immediately before the exposure ends.
111
I