Owner's Manual

Changing Image Playback Settings
lIBmJ Adjusting the LCD Monitor Brightness
You can adjust the brightness of the LCD monitor to make it easier to
read.
] LCD brightness
Date/Time
Language
Video system
..
.
.. ~.:~:.
08/241'08 13: 10
English
NTSC
1 Select [LCD brightness].
• Under the [~:] tab, select [LCD
brightness], then press <@>.
2 Adjust the brightness.
• While referring to the gray chart, turn
the
<0> dial, then press <@>.
• You can also display the [LCD
brightness] screen with the < FUNC. >
button.
[JJ To check the image's exposure, you should look at the histogram (p.134).
Im3mJ Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after capture.
To keep the image displayed, set [Hold]. To
not have the image,displayed, set [Off].
Select [Review time].
• Under the [0·] tab, select [Review
time], then press <@>.
Set the desired time.
• Turn the < 0 > dial to select the
setting
I then press < @ >.
[il If [Hold] is set, the image will be displayed until the auto power off time
elapses.
145
I