Owner's Manual

Table Of Contents
Ii!iI3ml
Custom
Function
Settings
*
C.Fn
I:
Exposure
C.Fn I
-1
Exposure level increments
0:
1/3-stop
1:
1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, etc. Effective when you prefer to control the
exposure
in
less fine increments than 1/3-stop increments.
[j
The exposure level will
be
displayed
in
the viewfinder and on the LCD
panel as shown below.
C.Fn I
-2
ISO speed setting increments
0:
1/3-stop
1:
1-stop
C.Fn 1-3 ISO expansion
0:
Off
1: On
"H1" (equivalent to ISO 6400) and "H2" (equivalent to ISO 12800) will be
selectable for the ISO speed.
-----
- - - -
C.Fn I -4
Bracketing
auto
cancel
0:
On
The AEB and WB-BKT settings will be canceled if you set the power
switch to
<
OFF>
or clear the camera settings. AEB will also be
canceled when the flash is ready to fire.
1:
Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to
<OFF>.
(When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained
in
memory.)
174