Owner's Manual

Before You Start
!: ...........:...;+;-
08/241'0813:10
. E~gli~~.
NTSC
mmI!J Setting the Interface Language
1 Select [Language].
• Under the [~:] tab, select
[Language] (the third item from the
top), then press
<@>.
2 Set the desired language.
• Turn the < 0 > dial to select the
language, then press
<@>.
• The language will change.
LCD brightness
Date/Time
Language
Video system
mmI!J Setting the Date and Time
Check if the camera's date and time are set correctly. If necessary, set
the correct date and time.
1 Select [Date/Time].
• Under the [~:] tab, select [Datel
Time], then press <@>.
(08/24/2008)
OK Cancel
.
08 . 24 . 2ooaTIJ: to: 00
...
mm/dd/yy
Date/Tlme
Set Date/Time
2 Set the date, time and date
display format.
• Turn the < 0 > dial to select the number.
• Press < @> so ¢ is displayed.
• Turn the <0 > dial to select the desired
setting, then press <@ > (Returns to D ).
3 Exit the setting.
• Turn the < 0 > dial to select [OK],
then press
<@> .
.. The date/time will be set and the
menu will reappear.
[i] It is important to set the correct date/time because it will be recorded
together with each captured image.
42