Owner's Manual

Ii!iI3ml Flash Control '*
• E-TTL II
For normal flash exposures, set it to [Evaluative].
If [Average] is set, the flash exposure will be averaged for the entire metered
scene as with an external metering flash. Flash exposure compensation may
be necessary depending on the scene, so this setting is for advanced users.
Setting an External Speedlite
Select either [External flash func. setting] or [External flash C.Fn setting].
For details
on which external Speedlite settings the camera can set, see the
compatible EX-series
(such as the 430EX II) Speedlite's instruction manual.
Attach the Speedlite to the camera and turn it on.
1 Select either [External flash func.
setting] or [External flash C.Fn
setting].
• Turn the <0> dial to select the item,
then press
< @ >.
• Settings which cannot be set will be
dimmed.
External flash tunc. setting 2
Xlermn llasn runc. senlng
FI~sh mo~e E-TJl II 11
Shutter sync. 1 st curtain
FEB -3..2 .. 1.~.1 ..2 .. .J
Flash expo camp -2 .. 1•• ~ •• 1.:2
E- TIL II Evaluative
loom Auto
m!aClear Speedlite settings
External flash C.Fn setting
External flash C.Fn setting :
Auto power off
a.Enabled
1 :Disabled
112
Set the external flash function
settings.
• Select a flash function and set it as
desired. The procedure is the same
as setting a menu function.
• On the flash function settings screen,
the settable items
or current settings
displayed differ depending on the
current flash mode settings
or flash
Custom Function settings.
• If you press the
< INFO. > button to clear
the Speedlite settings, both the
external Speedlite and built-in flash
settings will be cleared.