Owner's Manual

C. Fn I : Exposure
C.Fn n: Image
C. Fn ill :Autofocus/Drive
C. Fn IV :Operation/Others
Clear all Custom Func. (c. Fn)
UilmD Setting Custom Functions *:
~ 1 Select [,g,],
• Turn the <B> dial to select the [,g,]
tab.
2 Select the group.
• Turn the <0> dial to select C.Fn 1-
IV, then press < @>.
Change the setting as desired.
• Turn the < 0 > dial to select the
setting (number), then press
< @ >.
• Repeat steps 2 to 4 if you want to set
other Custom Functions.
• At the bottom
of the screen, the
current Custom Function settings are
indicated below the respective
numbers.
4
Custom Function No. 3 Select the Custom Function
number.
• Turn the < 0> dial to select the
Custom Function No., then press
<@>.
C.Fn I :Exposure
Exposure level increments
o1/3-stop
1.' 12·stOD
5 Exit the setting.
• Press the <MENU> button.
.. The screen for step 2 will reappear.
Clearing All Custom Functions
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.
[II Even after all the Custom Functions are cleared, the setting for [.Q.C.Fn IV •
5:
Focusing Screen] will remain intact
172