User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<On>
Start: Month, W
eek, Day
End: Month, Week, Day
<Auto Sleep Time>
If the machine has not been operated or has had no data to process for a specied period of time, the machine enters
sleep mode to save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed.
Auto Sleep is not performed when the setting menu is displayed. We recommend using the factory default settings to
save the most power. Entering Sleep Mode(P. 160)
1 to 30 (min.)
<Auto Reset Time>
If a key is not pressed for a specied period of time, the scr
een and the settings are initialized to display the
default screen (Auto Reset). Specify the interval at which the Auto Reset is performed. The Auto Reset is not
performed in the following cases:
● The setting menu is displayed.
● The machine is processing data, such as when printing documents.
● An error message is displayed and the Alarm indicator is blinking (However, Auto Reset is performed when the
error does not prevent the user from continuing to use a function.)
0 (Auto Reset is disabled.)
1 to 2
to 9 (min.)
<Menu> ( ) <Timer Settings> <Auto Reset Time> Specify the Auto Reset time <Apply>
( )
<Function After Auto Reset>
Select whether to r
eturn the display to the default screen after the Auto Reset is performed. On the touch panel
model, if <Default Function> is selected, the main screen of the function selected in <Default Screen after Startup/
Restoration> is displayed (
<Default Screen after Startup/Restoration>(P. 378) ). On the 5 Lines L
CD model, if
<Default Function> is selected, the display returns to the main screen for copy mode. If <Selected Function> is
selected, the display returns to the main screen of the function that was selected.
<Default Function>
<Selected Function>
<Menu> ( ) <Timer Settings> <Function After Auto Reset> Select <Default Function> or
<Selected Function>
Setting Menu List
384