User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
● Setting <Auto Adjust V
oIP Comm. Speed> to <On> causes the initial transmitting speed when sending
or receiving a fax to be slower.
<TX Function Settings>
Specify settings for sending fax
es.
<Change Default Settings>
You can change the default settings used for sending faxes. The selected settings are used as the default
settings when scanning originals. Changing the Default Settings for Functions(P. 155)
<Resolution>
<200 x 100 dpi (Normal)>
<200 x 200 dpi (Fine)>
<200 x 200 dpi (Photo)>
<200 x 400 dpi (Superne)>
<Density>
9 Le
vels
<2-Sided Original>
*1
<Off>
<Book Type>
<Calendar T
ype>
<Sharpness>
7 Levels
<Register Unit Name>
Register the name of a company or person. Registering the Fax Number and Unit Name(P. 73)
The r
egistered name is sent as sender information to the destination.
<TX Terminal ID>(P. 394)
<Menu> <Fax Settings> <TX Function Settings> <Register Unit Name> Enter the unit name
<Apply>
<ECM TX>
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
err
ors on received faxes, see
<ECM RX>(P. 395) .
<Off>
<On>
● ECM must be enabled on both the machine and the other fax de
vice because error checks are
performed on both the sending and receiving devices.
● Even when ECM is enabled, errors may occur due to telephone line conditions.
Setting Menu List
392