User's Manual

Table Of Contents
Connecting Directly (Access Point Mode)
2KUU-05J
Even in an envir
onment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile
device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without dicult
settings.
Preparing for Direct Connection (Access Point Mode)(P. 270)
Connecting Directly (Touch Panel Model)(P. 271)
Connecting Directly (5 Lines LCD Model)(P. 271)
Preparing for Direct Connection (Access Point Mode)
Establish a connection by using Access Point Mode in the following order (only for IPv4 environment).
Preparing the mobile device
Congur
e settings to connect the mobile device to Wi-Fi.
Put the machine into the connection standby status.
<Menu> ( ) <Network Settings> <Direct Connection Settings> set <Use
Dir
ect Connection> to <On>.
Specifying the value for time until auto termination
Y
ou can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Time Until Direct Connection Termination>(P. 366)
Connecting multiple mobile de
vices at the same time
Congure the machine's SSID and network key arbitrarily. The network key can be left blank.
<Access
Point Mode Settings>
(P. 366)
Changing the IP address for direct connection
The IP address for direct connection is set automatically. You can also set any IP address.
<IP Address
Settings for Dir
ect Conn.>(P. 366)
Linking with Mobile Devices
270