User's Manual

Table Of Contents
7
Select a wireless LAN router.
Select the r
outer whose SSID matches the one that you have written down.
If your wireless router is not found
Check
whether the machine is properly installed and ready to connect to the network.
Installation/
Settings Pr
oblems(P. 469)
8
Enter the network key that you have written down.
Enter the network k
ey, and select <Apply>.
On how to enter text, see
Entering Text(P. 124) .
9
Select <Yes>.
If an error message is displayed during setup
Select <Close>, check whether the network k
ey is correct, and return to step 5.
10
Wait until message <Connected.> is displayed.
W
ait several minutes until the IP address and other items are set automatically.
Signal strength
When
more than one wireless router is available for connection, the machine connects to the device
with the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).
Y
ou can set the IP address manually.
Setting IP Addresses(P. 32)
On
the touch panel model, while the machine is connected to the wireless LAN, the Wi-Fi icon is
displayed in the Home screen.
Home Screen(P. 112)
Reducing power consumption
Y
ou can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router.
<Power Save Mode>(P. 365)
Setting Up
26