User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
0 (Do not terminate session automatically)
1 to 10 to 60 (min.)
<Menu> ( ) <Network Settings> <Direct Connection Settings> <Time Until Direct
Connection T
ermination>
Enter the time <Apply> ( )
<Access Point Mode Settings>
Congure the SSID/network k
ey arbitrarily. If you want to connect multiple mobile devices to the machine at the
same time, you need to congure both SSID and network key arbitrarily.
<Use Custom SSID>
<Off>
<On>
<SSID (1-20 Char
acters)>
<Use Custom Network Key>
<Off>
<On>
<Network Key (10 Char.)>
<Menu> ( ) <Network Settings> <Direct Connection Settings> <Access Point Mode
Settings> <Use Custom SSID> or <Use Custom Network Key> <On> Enter the SSID/network
k
ey
<Apply>
<IP Addr
ess Settings for Direct Conn.>
Specify an IP address for using Direct Connection.
<Menu> ( ) <Network Settings> <Direct Connection Settings> <IP Address Settings for
Direct Conn.> Enter the IP address <Apply> ( )
● Do not use the same number as the IP addr
esses for direct connection and for the machine's wired LAN/
wireless LAN connection. If you set the same number, then a direct connection cannot be initiated.
Setting Menu List
366