User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Easy Connection via PC>
Start Easy Connection via PC (cableless setup mode). This allows you to use Canon Laser NW Device Setup Utility on
your PC to congure network settings.
<Menu> ( ) <Network Settings> <Easy Connection via PC> Start connecting
● "Canon Laser NW De
vice Setup Utility" is available on the Canon website (https://global.canon).
<TCP/IP Settings>
Specify settings for using the machine in a T
CP/IP network, such as IP address settings.
<IPv4 Settings>
Specify settings for using the machine in an IPv4 network.
<IP Address Settings>
Congure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
network. Setting IPv4 Address(P. 33)
<Auto Acquire>
<Select Protocol>
<Off>
<DHCP>
<BOOTP>
<RARP>
<Auto IP>
<Off>
<On>
<Manually Acquir
e>
<IP Address>: 0.0.0.0
<Subnet Mask>: 0.0.0.0
<Gateway Address>: 0.0.0.0
<Check Settings>
<Auto Acquire>
*
<IP Address>
<Subnet Mask>
<Gateway Address>
<PING Command>
Select to check that the machine is connected to a computer o
ver a network.
Testing the Network
Connection
(P. 34)
Setting Menu List
367