User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
<Off>
<On>
<Menu> ( ) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode T>
<On>
● Printed images or te
xt may be blurred when you set this to <On> and print in a low-humidity
environment.
● When you set this to <On>, <Special Printing Mode U>, <Special Printing Mode Q>, and <Special
Printing Mode R> are set to <Off> automatically.
<Special Printing Mode L>
Smudges may appear in a printout when the paper has a lot of paper dust or other dust particles. In such cases,
setting this to <On> may impr
ove the quality of the printout.
<Off>
<On>
<Menu> ( ) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode L>
<On>
<Select Line Width>
If a printed barcode cannot be read, changing this may resolve the problem.
<Auto>
<Thin>
<Slightly Thin>
<Slightly Thick>
<Thick>
<Menu> ( ) <Adjustment/Maintenance> <Special Processing> <Select Line Width>
Select the line width
<Clean Fixing Assembly>
Clean the xing assembly after the toner cartridge or the drum cartridge is r
eplaced or if black streaks appear on
printouts.
Cleaning the Fixing Assembly(P. 441)
Setting Menu List
420