User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Cleaning the Fixing Assembly
2KUU-084
Dirt may adher
e to the xing assembly inside the machine and cause black streaks to appear on printouts. To clean
the xing assembly, perform the following procedure. Note that you cannot clean the xing assembly when the
machine has documents waiting to be printed. To clean the xing assembly, you need plain A4 or Letter size paper. Set
the paper in the drawer before performing the following procedure.
Loading Paper(P. 133)
● Cleaning consumes the toner cartridge and the drum cartridge. Mak
e sure that there is sucient amount
remaining in the toner cartridge and the drum cartridge beforehand.
Checking the Remaining Amount
of Consumables
(P. 453)
1
Display the <Menu> screen.
Home Screen(P. 112)
Touch Panel Model
Select <Menu> in the Home scr
een.
5 Lines LCD Model
Press
.
2
Select <Adjustment/Maintenance>.
3
Select <Clean Fixing Assembly>.
4
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <Start>.
➠ Cleaning starts.
Maintenance
441