User's Manual

Table Of Contents
Monitoring and Controlling the Machine with SNMP
2KUU-015
Simple Network Management Pr
otocol (SNMP) is a protocol for monitoring and controlling communication devices in a
network by using Management Information Base (MIB). The machine supports SNMPv1 and security-enhanced
SNMPv3. You can check the status of the machine from a computer when you print documents or use the Remote UI.
You can enable either SNMPv1 or SNMPv3, or both at the same time. Specify the settings for each version to suit your
network environment and the purpose of use.
SNMPv1
SNMPv1 uses information called "community" to dene the scope of SNMP communication. Because this
information is e
xposed to the network in plain text, your network will be vulnerable to attacks. If you want to
ensure network security, disable SNMPv1 and use SNMPv3.
SNMPv3
With SNMPv3, you can implement network device management that is protected by robust security features.
Note that TLS must be enabled for the Remote UI befor
e conguring SNMPv3 (
Conguring the Ke
y and
Certicate for TLS(P. 309) ).
The machine does not support the tr
ap notication feature of SNMP.
To change the port number of SNMP, see
Changing Port Numbers(P. 306) .
SNMP management softwar
e, when installed on a computer on the network, enables you to congure,
monitor, and control the machine remotely from the computer. For more information, see the instruction
manuals for your management software.
For more information about the basic operations to be performed when setting the machine from the
Remote UI, see
Setting Up Menu Options from Remote UI(P. 345) .
1
Start the Remote UI and log in to System Manager mode.
Starting Remote
UI(P
. 336)
2
Click [Settings/Registration] on the Portal page.
Remote UI Screen(P. 337)
3
Select [Network Settings] [SNMP Settings].
4
Click [Edit].
Setting Up
64