User's Manual

<Number of Times to Redial>
Species ho
w many times the machine redials. Enter a number, and select <Apply>.
<Redial Interval>
Species the interval between redials. Enter a number, and select <Apply>.
<Redial When Error Occurs>
When set to <On>, species to redial when a transmission error occurs.
<TX Terminal ID>
Specify settings for adding the sender information, including the fax number and the name of the machine, to
the fax header. The r
ecipient can check who sent the fax by looking at the added information.
<Off>
<On>
<Print Position>
<Inside Image Ar
ea>
<Outside Image Area>
<Mark Number as>
<F
AX>
<TEL>
<Menu> <Fax Settings> <TX Function Settings> <TX Terminal ID> <On> Specify the
settings <Apply>
<Print Position>
Species the position to print the terminal ID information in the sent fax. Select <Inside Image Ar
ea> to print
the information inside the image area, or <Outside Image Area> to print the information outside the image
area.
<Mark Number as>
Adds the "FAX" or "TEL" mark in front of the fax number registered for the machine (
Registering the Fax
Number and Unit Name
(P. 73) ). Select <TEL> to indicate that the notied number is a telephone number.
<Check Dial Tone Before Sending>
*2
Select whether to check the dial tone before a fax number is dialed.
Setting Menu List
394