User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Replacing the Drum Cartridge
2KUU-087
The machine displays a message when the amount r
emaining in the drum cartridge is low. Note that the print quality
may suffer if you continue printing without resolving this issue. You can check the amount remaining in the drum
cartridge on the display (
Checking the Remaining Amount of Consumables(P. 453) ).
When a Message Appear(P. 449)
Procedure for Replacing the Drum Cartridge(P. 450)
When a Message Appear
The message that is displayed depends on the amount remaining in the drum cartridge. Depending on which
message is displayed, prepare a new drum cartridge ( Consumables(P. 462) ) or r
eplace the current drum cartridge
with a new one (
Procedure for Replacing the Drum Cartridge(P. 450) ).
<Pr
eparing a drum cartridge is recommended.>/<Preparing a drum cart. is
recommended.>
This message noties you that the drum cartridge needs to be r
eplaced soon. Make sure that you have a
replacement drum cartridge ready. Replace the drum cartridge if you see this message before you start to print
a large job.
When this message is displayed
● When cop
ying or printing, you can continue printing the original.
Specify when this message is displayed
● You can set any value as the percentage of the amount remaining in the drum cartridge that triggers
this message.
<Displ. Timing for Cartridge Prep. Notif.>(P. 416)
<Drum cart. end of lifetime. Replacement is recommended.>/<Drum cart. life end.
Replcmt. recommended.>
This message noties you that the drum cartridge has r
eached the end of its lifetime. It is recommended that
you replace the drum cartridge with a new one. You can continue printing, but the print quality cannot be
guaranteed.
Maintenance
449