Owner's Manual

66
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback
Wireless Features
Setting Menu
Accessories
Appendix
Adjusting the Flash Output
Still Images Movies
Choose from the three ash levels in / / modes.
1
Enter / / mode.
2
Congure the setting.
● Choose [ ] menu (
=
23) > [Flash
settings] > [Flash mode] > [Manual] and
congure [Flash output].
● : Manual
● Calculation of standard exposure is based on the specied
metering method (
=
52).
● When the ISO speed is xed, you can compare your specied
value (indicated by the position where the exposure level mark
moves) to the standard exposure level by pressing the shutter
button halfway. The exposure level mark is shown as [
] or [ ]
when the difference from standard exposure exceeds 3 stops.
● After you set the shutter speed and aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● When the ISO speed is xed, screen brightness may change
depending on your specied shutter speed and aperture value.
However, screen brightness remains the same when the ash is
up and the mode is set to [
].
● Exposure may not be as expected when the ISO speed is set to
[AUTO], because the ISO speed is adjusted to ensure standard
exposure relative to your specied shutter speed and aperture
value.
● Image brightness may be affected by Auto Lighting Optimizer. To
keep the Auto Lighting Optimizer disabled in
mode, add a [ ]
mark to [Disable during man expo] on the Auto Lighting Optimizer
setting screen.
● To adjust exposure when ISO speed is set to [AUTO], select a
level on the exposure compensation bar.