User Guide

Network (SSID)/device name DIRECT-XXXX-TS8200series

Password XXXXXXXXXX (10 characters)

Wi-Fi security WPA2-PSK(AES)

No. of devices connected now XX/XX

IPv4 address XXX. XXX. XXX. XXX (12 characters)

IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)

IPv4 default gateway XXX. XXX. XXX. XXX (12 characters)

IPv6 link-local address XXXX: XXXX: XXXX: XXXX:

XXXX: XXXX: XXXX: XXXX (32 characters)

MAC address (Wi-Fi) XXX. XXX. XXX. XXX (12 characters)

Printer name XXXXXXXXXXXXXXX (up to 15 characters)

Bonjour service name XXXXXXXXXXXXX

XXXXXXXXXXXXX

XXXXXXXXXXXXX (up to 52 characters)

("XX" represents alphanumeric characters.)

If Settings is selected in the Wireless Direct setting list screen, the following settings are available.

• Enable/disable Wireless Direct

Enables/disables Wireless Direct.

• Change SSID/device name

Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for

Wireless Direct.

• Change password

Changes the password for Wireless Direct.

• Connection request confirmation

Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting

the printer.

• Advanced setup

For details on each setting item:

Advanced setup

• Set printer name

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.

209