Online Manual

Note
• Depending on the copy menu, some setting items cannot be selected. This section describes the
setting items in Standard copy.
The setting item which cannot be selected is displayed grayed out.
For more on the setting items for Photo copy, see Copying Photos.
• Some settings cannot be specified in combination with the setting of other setting item or the copy
menu. If the setting which cannot be specified in combination is selected, appears on the touch
screen. In this case, select on the upper left on the touch screen to check the message and
change the setting.
• The settings of the page size, media type, etc. are retained even if the printer is turned off.
• When copying starts in the copy menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the touch screen. Change the
setting, following the on-screen instructions.
Following setting items can be changed.
• Intensity
Specify the intensity.
A: Select to activate/deactivate automatic intensity adjustment.
When ON is selected, the intensity is adjusted automatically according to the originals loaded on the
platen.
B: Drag to specify the intensity.
• Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing/Enlarging Copies
• Paper src
Select a paper source (Rear tray/Cassette/Auto) where paper is loaded.
Note
• When Auto is selected, paper is fed from the paper source where the paper that matches the
paper settings (page size and media type) is loaded.
284