User's Manual

Cannot Proceed beyond Scanner Connection Screen
If you cannot proceed beyond the Scanner Connection screen, check the following.
Check 1
Check that the supplied USB cable is securely connected to the scanner and
computer.
Connect the scanner and the computer with the USB cable as shown in the illustration below. The USB
connector is on the rear side of the scanner.
Important
•
Use the supplied USB cable.
•
Connect the Type-C side to the scanner. For details, see Scanner Connection Method.
Check 2
Disconnect the USB cable from the scanner and the computer, and then
connect it again.
Important
•
In macOS, check that a lock icon is displayed at the bottom left of the Printers & Scanners screen.
If the lock icon is (locked), click it to unlock. (The administrator name and password are required to
unlock.)
Check 3
If you cannot resolve the problem, follow the procedure below to start the
installation over.
Windows:
1. Click Cancel.
2. In Setup Canceled screen, click Back to Top button.
3.
In Start Setup screen, click Exit button to exit setup.
4. Disconnect USB cable.
5.
Make sure that you have no application running.
6. Perform setup from this web page.
94