Manual
Before You Start
Installing the Batteries
* Batteries are not included in camera body only (not kit) sold in North
America. Obtain batteries separately.
The camera uses two CR2 lithium batteries.
* •
Open the battery compartment
cover.
• Slide the release lever in the
direction shown by the arrow in the
diagram, and open the cover.
Install the batteries.
• Make sure the battery contacts {+
and -) are properly oriented as
shown.
• Do not mix old and new batteries.
Close the battery compartment
cover.
• Press the cover until it snaps shut.
• The dale and lime must be set. See
page 26. (DATE Model only)
i
For places where CR2 batteries may not be easily available, take
spare batteries with you. Also carry spare batteries Ibr extended
shooting sessions.
11