Manual

Avl2 Exposure Compensation

Exposure compensation is used to alter the camera's standard

exposure setting. You can make the picture look lighter (increased

exposure) or darker (decreased exposure). The exposure

compensation amount can be set up to +/-2 stops in half-stop

increments.________________________________________________________

Turn the Mode Dial to a Creative

Zone mode except <M>.

Check the exposure setting.

• Press the shutter buttoh halfway

and check the display.

Set the exposure compensation

amount.

• Hold down the <Av0> button and

turn the <^S^> dial.

• To cancel the exposure

compensation, set the exposure

compensation amount to <I>.

Take the picture.

Standard exposure index

-2.1 ,».l .2*

Decreased Increased

exposure exposure

Exposure level mark

Q • The exposure compensation amount set is retained even after the

Mode Dial is set to <€9^>.

* The exposure compensation amount is canceled automatically

when you turn the Mode Dial to a Basic Zone mode.

• Assuming that a shutter speed of 1/125 sec. and an aperture

value of f/5.6 will give a correct exposure, setting the exposure

compensation amount to plus or minus 1 stop will change the

shutter speed or aperture value as follows;

“1 stop 0

+1 stop

Shutter speed 250

125 60

Aperture value

8.0

<r- 5.6

—>

4.0