Manual

Bulb Exposures I

When bulb is set, the shutter is open during the time you keep

pressing the shutter button fully. Bulb exposures are useful when

long exposures are required for night scenes, fireworks,

astronomical photography, etc.

_______________________________________

Turn the Mode Dial to <M>.

Set the shutter speed to “ buLb

' • Look at the LCD panel and turn the <£S> dial to select" buLb"

•" buLb "follows “ 30" ”.

Select the desired aperture value.

• Hold down the < Av0> button and turn the <£S> dial.

Start the bulb exposure.

■ ► During the bulb exposure, “ buLb " blinks on the LCD panel.

• The bulb exposure continues as long as you hold down the

shutter button.

' Remote Controller RC-5 (optional) can also be used for bulb

exposures (p.24). When you press the transmit button, the

exposure will start 2 sec. later. To stop the exposure, press the

button again. (DATE Model only)

’ With a new set of batteries, the maximum bulb exposure time (at

20'C) will be about 4 hours.

@]Multiple Exposures

Since the film is not advanced after each shot, you can expose

multiple shots on the same frame. You can expose up to nine shots

on a single frame.___________________________________________________

<1 Move the <►> arrow to the <IBh> icon.

* • Look at the LCD panel and press the <FUNC.> button. (S6)

►" I " will be displayed.

% Set the desired number of multiple exposures.

»Turnthe<¿S>dial.

• Press the shutter button halfway to return to normal camera

operation.