Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
Assignable Buttons
120
* Function can be used only by assigning it to a button.
NOTES
• When the [Gamma] setting in the custom picture file is set to [PQ] or [HLG], pressing an assignable button set
to [Slow Motion Recording] will have no effect (button disabled).
[White Balance]
Enters the direct setting mode with the white balance mode highlighted and
ready to be adjusted.
Ü – 65
[Status] Displays the status screens. Ü Ü 195
[Audio Status] Displays the [Audio] status screens. Ü Ü 198
[Custom Picture] Opens the most recently opened [/ ! Custom Picture] submenu. Ü – 121
[My Menu] Opens the [¥!My Menu] customized menu. Ü – 26
[Initialize Media] Opens the [Initialize Media] submenu. Ü Ü 35
[User Setting]*
Customizable slot. Assign to the button any menu setting you would like to
register.
Ü Ü –
Function name Description A