Owner's Manual

125
Custom Picture Settings
[/ ! Custom Picture] > [Other Settings] Submenu (Detailed Settings)
[HLG Color] [BT.2100], [Vivid]
Changes the quality of color reproduction when using the hybrid log gamma (HLG). This setting is
only available when [Gamma] is set to [HLG].
[BT.2100]: Color reproduction according to ITU-R BT.2100 specifications.
[Vivid]: More saturated color reproduction according to the 'Traditional Colour' approach in ITU-R
BT.2390.
[Activate Other Settings] [On], [Off]
Set this setting to [On] to enable the editing of the custom picture’s detailed settings explained in the
following table.
Menu items Setting options and additional information
[Black]*
[Master Pedestal] –50 to 50 (±0)
Increases or decreases the black level. Higher settings will make dark areas brighter but decrease
contrast. When [Gamma] is set to [Canon Log 3], this setting is not available.
[Master Black Red],
[Master Black Blue]
–50 to 50 (±0)
These settings correct the color cast in blacks. When [Gamma] is set to [Canon Log 3], these settings
are not available.
[Black Gamma]*
[Level] –50 to 50 (±0)
[Range], [Point] –20 to 50 (±0)
These settings control the lower part of the gamma curve (dark areas of the image). When [Gamma]
is set to [Wide DR], [PQ], [HLG] or [Canon Log 3], these settings are not available.
[Level]: Raises or lowers the lower part of the gamma curve.
[Range]: Selects the adjustment range from the selected [Point].
[Point]: Determines the shape of the lower part of the gamma curve.
[Low Key Satur.]*
[Activate] [On], [Off]
Set this setting to [On] to enable the adjustment of color saturation in dark areas with the [Level]
setting.
[Level] –50 to 50 (±0)
Specifies how saturated colors are in dark areas.
Menu items Setting options and additional information
Input
Output
[Point]
[Range]
[Level]