Owner's Manual

Table Of Contents
5
131
Playback
Playback
This section explains how to play back recordings with the camcorder. For details on playing back recordings
using an external monitor, refer to Connecting to an External Monitor (A 145).
Clip Index Screen
When you set the camcorder to mode, an index screen
will appear. From the index screen you can access the various
playback functions.
If the selected SD card contains clips recorded at a system
frequency other than the one currently used by the camcorder,
you will not be able to play back the clips. In such case, change
the camcorder's system frequency (A 50) to match the
recordings on the card.
Set the camcorder to mode (A 22).
The clip index screen appears. The index screen that appears depends on the currently selected recording
format but you can change the index screen (A 132).
Operating modes: