Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
Clip Operations
138
Displaying Clip Information
Select [Display Clip Info] in the clip menu to display the selected clip’s information screen ([Clip Info] screen).
Push the joystick left/right to switch to the previous/next clip. When you have finished, press the CANCEL button
to return to the clip index screen.
1
XF-HEVC clips only.
2
For clips recorded using slow motion recording, the shooting frame rate and playback frame rate will both be displayed.
Displaying the User Memo
From the [Clip Info] screen, push the joystick up to display the [Q] screen. In this screen you can check details
about the embedded user memo. Push the joystick down to return to the [Clip Info] screen.
Displaying Custom Picture Settings
When a clip contains an embedded custom picture file (A 123), you can check the custom picture settings
used when the clip was recorded. From the [Clip Info] screen, push the joystick down to display the first of four
screens with the clip’s custom picture settings. Repeatedly push down the joystick to check the information
screens in the following order:
[/ Data 1/4] to [/ Data 4/4] screens [Q] screen [Clip Info] screen.
9
546
1
3
2
8
10
14
13
12
15
16
17
11
7
1 Thumbnail of the selected clip
2 Thumbnail of the next clip
3 Thumbnail of the previous clip
4 SD card (the one currently selected appears in
white)
5 Clip geotagged with GPS information (A 110)
6 Slow motion recording
1
(A 113)
7 Clip number / Total number of clips
8 Recording date and time
9 Clip file name (A 48)
10 Compression, bit rate and resolution (A 50)
11 Frame rate
2
(A 50)
12 Shot mark (A 107, 141) and $ mark / % mark
(A 107, 139)
13 Custom picture file embedded (A 123)
14 Color sampling (A 51)
15 Clip’s start time code
16 Clip’s end time code
17 Clip duration