Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
Clip Operations
140
Copying All the Clips
1 Select [Copy All Clips].
> [3 ! Recording/Media Setup] > [Clips] > [Copy All Clips]
2 Select [OK] and then press SET.
• The clips are copied to the other SD card. While clips are being copied, you can press SET to interrupt the
operation.
3 When the confirmation message appears, press SET.
NOTES
• Clips cannot be copied if either card slot cover is open.
• If the destination card already contains a clip with the same clip number, the clip being copied will be renamed
to the number following the largest clip number in the card.
Deleting Clips
You can delete clips as long as they don't have an $ mark. To delete such clips, delete the $ mark
beforehand.
Deleting a Single Clip
1 Select the desired clip and then press SET to open the clip menu.
2 Select [Delete Clip] and then press SET.
3 Select [OK] and then press SET.
• While the clip is being deleted, the operation cannot be canceled.
4 When the confirmation message appears, press SET.
Deleting All the Clips
1 Select [Delete All Clips].
> [3 ! Recording/Media Setup] > [Clips] > [Delete All Clips]
2 Select [OK] and then press SET.
• While clips are being deleted, you can press SET to interrupt the operation. Clips deleted before you press
SET will be deleted permanently.
3 When the confirmation message appears, press SET.
Deleting the User Memo and GPS Information
1 Select the desired clip and then press SET to open the clip menu.
2 Select [Delete User Memo] and then press SET.
3 Select [OK] and then press SET.
• The user memo and GPS information are deleted from the clip.