Owner's Manual

Audio Output
150
Audio Output
The camcorder can output audio from the SDI terminal, HDMI OUT terminal, × (headphone) terminal or
speaker*. You can select which two channels of the 4 audio channels recorded with the clip will be output from
the HDMI OUT terminal, headphones and speaker.
* Only monaural output is available for the speaker.
Audio output configuration
1
You can select the two channels to be output with the procedure below.
1 Select the menu setting corresponding to the desired terminal.
> [ ¡ %*Audio Setup] > [Monitor Channels] (headphones or speaker) or [HDMI OUT Channels]
(HDMI OUT terminal)
* Appears on page ! in mode.
2 Select the desired option and then press SET.
• The audio channels selected for output will appear on the right of the screen (In mode, only if
> [ ¢ % Monitoring Setup] > [Custom Display 2] > [Monitor Channels] is set to [On]).
Options
All of the following settings are available for [Monitor Channels]; only [CH1/CH2] and [CH3/CH4] are available for
[HDMI OUT Channels].
NOTES
• If you set an assignable button to [Monitor Channels] (A 117), you can press the button to toggle between
the audio channel output options.
Recorded audio configuration Audio output during recording/playback
Audio format Audio bit depth SDI terminal HDMI OUT terminal
1
4-channel
linear PCM
16 bit
4-channel
linear PCM
24 bit
2-channel
linear PCM
16 bit
Operating modes:
Setting
Audio output
L R
[CH1/CH2] CH1 CH2
[CH1/CH1] CH1 CH1
[CH2/CH2] CH2 CH2
[CH1+2/CH1+2] CH1+CH2 mixed CH1+CH2 mixed
[CH3/CH4] CH3 CH4
[CH3/CH3] CH3 CH3
[CH4/CH4] CH4 CH4
[CH3+4/CH3+4] CH3+CH4 mixed CH3+CH4 mixed
[CH1+3/CH2+4] CH1+CH3 mixed CH2+CH4 mixed