Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
7
153
Network Functions
About the Network Functions
You can connect the camcorder to a wireless network or a compatible network device using Wi-Fi (A 154) or to
a wired network using an Ethernet cable (A 159).
Network functions and connection types
1
Connection to a Wi-Fi network via an external access point (wireless router, etc.)
2
Direct connection to one Wi-Fi-enabled device where the camcorder serves as the Wi-Fi access point.
Before using the network functions
• The instructions in this chapter assume you already have a correctly configured and working network, network
device(s) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network
devices you plan to use.
• Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet)
and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.
IMPORTANT
• Data transmitted over networks is not encrypted.
• Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or
settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
• Using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties. Also,
the camcorder is shipped with default passwords so you can test the network functions as soon as possible.
Changing the initial settings is recommended. Be aware of any data security risks involved.
NOTES
• About the Wi-Fi antenna: When using the camcorder’s Wi-Fi functions, do not
cover the Wi-Fi antenna with your hand or other object. Covering it may
interfere with wireless signals.
• Do not open the card slot covers while using network functions.
• Do not place cables connected to the SDI terminal or HDMI OUT terminal near
the Wi-Fi antenna. Doing so may negatively affect the wireless communication
over Wi-Fi.
Network function Description
Wired
network
Wi-Fi
A
Infrastructure
1
Camera Access
Point
2
Browser Remote
Control the camcorder remotely from the Web
browser of a connected device.
– – Ü 162
IP Streaming
Stream the camcorder’s live video and audio
over IP to a compatible IP video decoder
connected to network.
Ü – – 173
FTP File Transfer
Transfer clips recorded with the camcorder to
another device connected to the network using
the FTP protocol.
Ü Ü – 176
Wi-Fi antenna