Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
169
Browser Remote: Controlling the Camcorder from a Network Device
To ad j u st the focus and use focus related functions
Touch the [Focus] tab in the detailed camcorder settings panel.
1 Focus mode button
2 [Face Det. & Tracking] button
3[Focus Guide] (Dual Pixel Focus Guide function) button
4Tracking buttons
5 Manual focus buttons
Manual focus
1Touch [AF].
2 Touch [MF] and then touch [ ].
3 Touch one of the manual focus buttons on the [Near] side to focus closer or
one of the controls on the [Far] side to focus farther away. There are three levels
of adjustment - [ ]/[ ] is the smallest and [ ]/[ ] the largest.
Focus guide
1 Touch the [Focus Guide] button.
2 Touch [On] to display the focus guide (A 75) and then touch [ ].
Touch focus
In autofocus mode, you can touch on a subject that appears in the Browser Remote’s live view screen in order to
select it for focusing.
1 Make sure the touch focus function has been unlocked and the
D
icon appears in the button (A 166).
2 Touch the desired subject in the live view screen.
• Depending on the focus mode used, an AF frame may appear on the selected subject.
Face AF
1 Touch [Face Det. & Tracking].
2 Touch [On] and then touch [ ].
• A face detection frame will appear on the live view screen around all detected faces. The main subject is
indicated with arrows (
Þ
) on the sides. The camcorder will track the main subject as it moves.
• Touch on the face of a different subject to select it as the main subject.
3 Focus manually or let the camcorder focus automatically on the main subject's face.
Tracking other subjects
1 Touch [Tracking].
• This step is not necessary when [v#Camera Setup] > [AF Frame] is set to [Automatic] (A 79).
2 Touch the live view screen to select the subject you wish to track.
• A tracking frame will appear on the live view screen and the camcorder will track the subject as it moves.
• Touch [Cancel Tracking] to select a different subject.
3 Focus manually or let the camcorder focus automatically on the subject.
1
2
3
4
5