Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
Taking Photos
180
Options
[Reset]: Photo numbers will restart from 100-0001 every time you insert a new card. If a card already
contains previous recordings, photo numbers will continue from the number following that of the
last photo on the card.
[Continuous]: Photo numbers will continue from the number following that of the last photo recorded with the
camcorder. This setting is the most convenient for managing files on a computer. We
recommend using the [Continuous] setting.
NOTES
• Each folder can contain up to 500 files. When that number is exceeded, a new folder is created automatically.
Understanding folder names
• An example folder name is “101_1103”. The first 3 digits indicate the folder number (from 100 to 999) and
the last 4 digits indicate the month and day when the folder was created. In the example, the folder
numbered 101 was created on November 3.
Understanding photo numbers
• An example photo number is “101-0107”. The first 3 digits indicate the folder number where the photo is
stored and the last 4 digits indicate the consecutive number assigned to the photo (from 0001 to 9999).
• The photo number also indicates the name and location of the file on the card. For example, a photo
numbered 101-0107 that was recorded on November 3, is located in the “DCIM\101_1103” folder as the
file “IMG_0107.JPG”.