Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
181
Playing Back Photos
Playing Back Photos
You can view the photos you recorded on SD card B.
Displaying the [Photos] Index Screen
1 Set the camcorder in mode (A 22).
2 Open the [Photos] index screen (A 132).
Viewing Photos
1 Move the orange selection frame to the desired photo.
2Press the Ò button to view the photo.
• The photo playback screen appears and the selected photo is
displayed.
•Use the Ú/Ù buttons or push the joystick left/right to
switch to the previous/next photo.
• Press the DISP button to hide/show the onscreen displays.
• Press the Ñ button to return to the [Photos] index screen.
IMPORTANT
• Observe the following precautions while an access indicator is
illuminated in red. Failure to do so may result in permanent data
loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
• The following photos may not be displayed correctly.
- Photos not recorded with this camcorder.
- Photos created or edited on a computer.
- Photos whose file names have been changed.
Operating modes: