Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
Menu Options
188
[
¢
Monitoring Setup] menu
Menu item Setting options and additional information
!
[LCD Brightness], [LCD Contrast] –99 to +99 (±0) (A 30)
[LCD Color] –20 to +20 (±0)
[LCD Sharpness] 1 to 4 (2)
[LCD Luminance] [Normal], [+1], [+2]
"
[VF Brightness], [VF Contrast] –99 to +99 (±0) (A 30)
[VF Color] –20 to +20 (±0)
[VF Sharpness] 1 to 4 (2)
[VF Luminance] [Normal], [High]
[VF Eye Sensor] [On], [Off]
When this setting is set to [On], the viewfinder will be dimmed automatically when the sensor does
not detect the user’s eye near the eyepiece for 30 seconds (or 10 seconds, in playback mode).
#
[LUT: LCD], [LUT: VF] [Wide DR : BT.709], [HDR Assist. (800%)], [HDR Assist. (400%)], [Off] (A 147)
[LUT: SDI], [LUT: HDMI] [Normal1 : BT.709], [Normal2 : BT.709], [Normal3 : BT.709], [Normal4 : BT.709],
[Wide DR : BT.709], [Wide DR : BT.2020], [PQ : BT.2020], [HLG : BT.2020], [Off]
[HLG Color] [BT.2100], [Vivid] (A 149)
[Gain for HDRSDR Conv.] –7.5 dB to +7.5 dB (–3.0 dB) (A 149)
[Range: SDI] (A 149)
[During Canon Log 3 Output] [Full Range], [Narrow Range]
[During HDR Output] [Full Range], [Narrow Range]
[Range: HDMI] (A 149)
[During Canon Log 3 Output] [Full Range Priority], [Narrow Range]
[During HDR Output] [Full Range Priority], [Narrow Range]
$
[B&W Image: LCD],
[B&W Image: VF], [B&W Image: SDI],
[B&W Image: HDMI]
[On], [Off] (A 30)
[Custom Display] –
[Audio Level Indicator] [On], [Off]
[Date/Time], [Camera Data] [On], [Off]
These settings are available only in mode when the menu is opened from the playback
screen (A 134) and determine whether the following onscreen displays will appear on the playback
image.
[Audio Level Indicator]: The audio level meter (clips only).
[Date/Time]: The date and time when the clip/photo was recorded.
[Camera Data]: The aperture value, shutter speed and gain value used to record the clip (clips only).