Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
195
Displaying the Status Screens
Displaying the Status Screens
You can use the status screens to check the camcorder’s various settings.
You can also output the status screens to an external monitor.
1Press the STATUS button to open the status screens.
• The status screen most recently displayed will appear.
• You can also press the AUDIO STATUS button to display only the [Audio]
status screens (A 198).
2Push the joystick left/right to scroll through the status screens.
3Press the STATUS button again to close the status screens.
• You can also press the MENU button to close the status screen and open the menu instead.
[Gamma/Color Space/Color Matrix] screen A 196
[SDR Gain/Range] screen A 196
[
/
Data] screens A 196
[Camera] screens A 197
[Assignable Buttons] screens A 197
[Audio] screens A 198
[Media] screen A 199
[Terminal Outputs] screen A 199
[Recording] screen A 200
[Metadata] screens A 200
[Battery/Hour Meter] screen A 201
[Network] screens A 201
[GPS Information Display] screen* A 203
* Only when the optional GP-E2 GPS Receiver is connected to the camcorder.
Operating modes: